check out my pics http://www.villagephotos.com/pubbrow...elected=774558 almost there just waiting for my tial 35mm and my fuel pump,don't flame me because of the manifold I got it for free ,anyway how long do you think this setup will last for my feed line i used 5/16 steel tubing,and i'm getting 75psi at that gauge in the pic

fresh stock d15b
034efi additional injector controller
msd 6btm
ssautoandcrap manifold
t3/t4oe
greddy type s blow off valve
and other stuff i can't think of because my grlfriend just flashed me her ****

 

and other stuff i can't think of because my grlfriend just flashed me her ****

why don't you take pictures of that and post it

 

I agree. it would be more interesting.

 

is that a secondary row of fuel injectors i see? 8 FI!?!? I dont think ive seen that b4 on HMT. Looks good to me.

 

(are those injectors pointed straight into the mani?...i have no experience with this, but shouldnt they be angled towards the motor? )

they should be angled but that was the ont good spot to install them and the manifold was to thin too angle the there, they go strait in but they don't stick out much so they shouldn't obstruct air flow

 

Actually the extra injectors will only be used at high rpms most likely, so aiming them up the intake runners actually will provide better atomization of the fuel and more cooling. Nicely done.

I'm excited to see some numbers out of that setup, though tuning will be a bit of a chore.

 

are those extra injectors are your primary ones just without a rail?

 

i'd say those are a secondary set of 4 injectors because they look like they are on the underside of the IM.

 

yeah they are secondaries,and tuning shouldn't be too bad thanks to the 034efi unit and my wideband o2