Project 10 second D15
 

Well decided to put the VX back together this year after selling the old setup off and stripping it down.Here was the old setup https://www.homemadeturbo.com/forum/...?topic=81750.0 ran some 11.6 at 118mph with that and now looking to go tens. Big thanks to dvst8r for the help with the roll bar and other stuff.I decided enough of the B series ---- time to get back to the dirty D :y

92 Civic VX Comp Eng roll bar kit me and Brett [dvst8r] welded in,painted by a old drunk guy in his barn/garage thing :D its stripped inside with a alum dash that cost $60 O0

Motor- D15B vtec 75mm Vitara pistons,FJT rods,Crespo springs and retainers :l, Colt cams regrind,Skank int mani,edelbrock TB

Tranny- stock SI/EX tranny replaced a couple seals and a bearing as well added a OBX diff and a LSD 6puck sprug disc heavy duty pressure plate and 12 lb steel flywheel.

Turbo- Holset HE351CW,Eville140 manifold,CDM 38mm gate,CDM 50mm blow off valve,Peakboost front mount and charge pipes from Urban Indians kit and a white tent 4" mild steel downpipe to CDM SS 3" catback :P

Fuel/Management- ECtune,chipped P28,Hondata 4bar,Precsion 880's,Walbro 255,Aeromotive regulator,LC1 WB and fuel lines half converted to -6

Suspension needs som attention its pretty much stock with Skunk 900lb rear springs will get some shocks,urethne bushing and traction bars this winter.

Pics so far.I cut most of the brake lines out when I stripped it down and was gonna do a tuck etc but then realized im way to lazy for all that bending so i bought a box of Russell Speedflex hose and made SSlines instead way easier way to make brake and clutch lines :6

Strip down and new rad support

Attachment 14662
Attachment 14663
Attachment 14664

Roll bar install

Attachment 14665
Attachment 14666
Attachment 14667

Got the car back from the painter he did a great job for the price he did the body work,painted the exterior,engine bay and the interior.Installed the alum dash need to cutout more holes for 2 1/16 gauges and cut it out for the SI cluster i got.

Attachment 14668
Attachment 14669
Attachment 14670
Attachment 14671
Attachment 14672
Attachment 14673

Assembled the motor and tranny the piston to wall clearance is .0-------huge i can damm near drop a wrench through :-X

Attachment 14674
Attachment 14675
Attachment 14676
Attachment 14677
http://i170.photobucket.com/albums/u.../June19015.jpg

Got the engine bay ready with new brake lines and dropped the motor in

Attachment 14678
Attachment 14679
Attachment 14680
Attachment 14681

Downpipe is gonna be tight need to get creative to fit a 4" pipe between the clutch slave

Attachment 14682

That is where its at now gonna put in a couple more days and hopefully in a week or so have it running.

Re: Project VX round two
 

wow looks amazing good job!

Re: Project VX round two
 

hella nice! show us more!

Re: Project VX round two
 

Baller ass lines :y

Re: Project VX round two
 

Damn that ---- is whiter then white but nothing is better then a white eg hatch.

Re: Project 10 second D15
 

looks ------- awsome. im using the same manifold with a hy35 in my hydro converted EF and i had the same problem with the downpipe. check out my build thread in my sig and i got some pics of my ghetto downpipe if your looking for some ideas.

Re: Project 10 second D15
 

that is so ------- sick good job

Re: Project 10 second D15
 

Whats the deal with those lines? Never seen any like that before, where can you get them?

Re: Project 10 second D15
 

Wow that looks great.

BTW what mounts are you using?

Re: Project 10 second D15
 

beautiful build.

Looks like trying to modify that dash will be a bitch though if you ever try and change it with the windshield in. Can you remove those screws without taking the windshield out first?