HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   problems (https://www.homemadeturbo.com/forced-induction-7/problems-24254/)

steelcityhonda 08-02-2004 09:19 PM

problems
 
alright, so im doing a pull, 1st gear, shift to 2nd, pull to about 4500, then i hear popping.

I go about 1/4 mile pull in my buddies, smoke everywhere. Look under the car, oil from the T in the block, ok no biggie.

I have oil coming out of my downpipe, billowing out the exhaust, and the car runs like ass. So i put oil in and drive home.

Under boost the car hesitates real bad, and jerks. If im real light on the gas, it pulls nice and smooth.

I pulled the plugs, they are black, but no oil or anything.

o, and while driving, the burnt oil is barely coming out the exhaust.

No unusal noises from the motor or anything, no burnt coolant, and a brand new center section of the turbo from CCA.

any clues?

alwaystootall 08-02-2004 11:48 PM

Re:problems
 
what kind of fuel management are u running?do u have excessive oil pressure going to the turbo?

B16Drag 08-02-2004 11:52 PM

Re:problems
 
oil pressure? blown seals?

hondalowlow 08-03-2004 12:26 AM

Re:problems
 
same thing happened to my civic on 422 heading to ebensburg

#1 and #3 cyl the rings froze the the piston and there is blow by.. causing it to run like ass

the engine ran fine under vaccum but when i hit boost it fell flat on its face. and oil everywhere..
its time for a upgrade for a total overhaul bud.. im me i got a extra d16a6 my screen name is hondalowlow on AOL
talk yo u in a bit


All times are GMT -5. The time now is 10:02 PM.


© 2024 MH Sub I, LLC dba Internet Brands