HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Problem with Radiator fitting after installing turbo... (https://www.homemadeturbo.com/forced-induction-7/problem-radiator-fitting-after-installing-turbo-38940/)

ncervantes 05-04-2005 01:08 PM

Problem with Radiator fitting after installing turbo...
 
Wanted to know if I could fit a 92-95 Civic radiator into my CRX. I need a narrow radiator and wanted to know if anyone had a suggestions.

thx!

Spenser 05-04-2005 01:14 PM

Re: Problem with Radiator fitting after installing turbo...
 
yes, you can fit it, but not with out modifications. The 92-95 rad is taller. you have to do all a couple things to make it fit

-angle the rad back toarwds the engine a bit, so its less tall
-cut the webbing out on the underside of the hood right above the rad
-or you could lower the lower rad support.

I don't think you need to make lower mounts for it really, just zip tie it in place.

ncervantes 05-04-2005 01:19 PM

Re: Problem with Radiator fitting after installing turbo...
 

Originally Posted by Spenser
yes, you can fit it, but not with out modifications. The 92-95 rad is taller. you have to do all a couple things to make it fit

-angle the rad back toarwds the engine a bit, so its less tall
-cut the webbing out on the underside of the hood right above the rad
-or you could lower the lower rad support.

I don't think you need to make lower mounts for it really, just zip tie it in place.

Zip ties....my kinda install! ;D

Thanks Spenser.


All times are GMT -5. The time now is 04:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands