plumbing
 

where is the best place to get oil fittings and lines? everything needed to go from the back of the block to the turbo, also from the turbo to the oil pan, this is for a d16z6

pictures
links
prices
part #'s

all would be helpful

Re:plumbing
 

I got all my stuff at the local hardware store. You would be surprised what they have.

Re:plumbing
 

check out my webpage, might be able to use what I did, or a variation.

Re:plumbing
 

Man, I'm in the same situation. Greddy want to tax a ---- load of money for banjo unions. That's the hard part.
The cake is the oil return line. Take some calipers or a ruler and measure the outer diameter of the oil return nipple-dude, you typed nipple;shut-up I'm trying to give advice. OK, the voices are gone. After you have the nipple measurments go to a autozone or napa and tell them what you need the hose for. They will find a hose and a fitting for your oil pan. I should cost less than $20. :)

Re:plumbing
 

yea, they have lots and lots and that's one reason I was asking, so I know what all to get including the sizes I need, etc..

Re:plumbing
 

oil fitting on the back of most honda blocks are 1/8 bsp.. but you can use the 1/8 NPT and be just fine.

Jeff

Re:plumbing
 

i just went and got some fittings around here in the shop and ordered some stainless steel lines with some flush style anodozed clamps.