plugging pcv valve hole in b16a2 I/M.
 

I'm going to be installing my catch can setup soon, just wondering what most of you have used to plug the pcv hole in the intake manifold of a b16a2 (stock intake manfiold).
Is there a plug from some other vehicle that would work, if so, Part # would be appreciated.
Thx.

Re: plugging pcv valve hole in b16a2 I/M.
 

just go to the auto parts store and get a vacuum plug, they'll be in the same section as the vacuum t's and vacuum lines etc.

Re: plugging pcv valve hole in b16a2 I/M.
 

yeah, I guess I never thought of just leaving the pcv valve in place and capping off the vacuum hose, sorry :-[

thanks.

Re: plugging pcv valve hole in b16a2 I/M.
 

Or just use it for another vacuum source. Like a dedicated line to your WG :)

Re: plugging pcv valve hole in b16a2 I/M.
 

A short length of hose and a bolt or screw shoved in the end will suffice too, if you want to be really ghetto.

Re: plugging pcv valve hole in b16a2 I/M.
 

Bingo. I used mine as the signal to my BOV.