Please overlook my turbo build, And comments welcome
10-20-2006, 07:49 PM
#1
0.5 BAR
Thread Starter
Join Date: Oct 2006
Posts: 95
Please overlook my turbo build, And comments welcome
I am building up my turbo kit again and im excited as ---- so let me know what you think and if i should change some ----
D16z6
Hf manifold- Going to gasket match it.
T3 Garrett Turbo 42/48 Internally gated to 10psi
440cc Percision Injectors
Front Mount Intercooler, Probly gonna get this from Egay.
I think im gonna get the intercooler piping from West Coast Turbo, cuase i went with
Tuner Toys kit last time and cutting that ---- was a bitch, WCT is cut to fit. Unless anyone
knows of some egay sets that are cheap that are already cut to fit on a 92-95 civic, cuase the WCT kit it 169.00.
Im not sure if i should use Chrome or Uberdata, I have used Uberdata before but i have herd Chrome is better. My
ECU is already chiped for Uberdata, its a p06 to p28 convert i guess. so does that mean all i need is a basemap chip?
Should i go with 3 inch downpipe or 2.5. Is 3 overkill?
Autometer Boost Gauge
Egay RFL BOV cuase the TurboXS one is probly gonna be to expensive
Stealthmode Oil line kit and Oil restrictor.
Any help would be appreacted. Thanks guys
D16z6
Hf manifold- Going to gasket match it.
T3 Garrett Turbo 42/48 Internally gated to 10psi
440cc Percision Injectors
Front Mount Intercooler, Probly gonna get this from Egay.
I think im gonna get the intercooler piping from West Coast Turbo, cuase i went with
Tuner Toys kit last time and cutting that ---- was a bitch, WCT is cut to fit. Unless anyone
knows of some egay sets that are cheap that are already cut to fit on a 92-95 civic, cuase the WCT kit it 169.00.
Im not sure if i should use Chrome or Uberdata, I have used Uberdata before but i have herd Chrome is better. My
ECU is already chiped for Uberdata, its a p06 to p28 convert i guess. so does that mean all i need is a basemap chip?
Should i go with 3 inch downpipe or 2.5. Is 3 overkill?
Autometer Boost Gauge
Egay RFL BOV cuase the TurboXS one is probly gonna be to expensive
Stealthmode Oil line kit and Oil restrictor.
Any help would be appreacted. Thanks guys
10-20-2006, 07:53 PM
#2
Guest
Posts: n/a
Re: Please overlook my turbo build, And comments welcome
Just get a $49 piping kit from racing solutions and get to work on the chopsaw. It's not hard at all to make a few cuts and you save over $100 right there.
Your ecu is chipped, but isn't "chipped for uberdata," you can run any rom editor. Yea all you need now is to put a basemap on the chip.
Use a 2.5" downpipe, 3" is overkill.
Your ecu is chipped, but isn't "chipped for uberdata," you can run any rom editor. Yea all you need now is to put a basemap on the chip.
Use a 2.5" downpipe, 3" is overkill.
10-20-2006, 07:56 PM
#3
0.0 BAR
Join Date: Dec 2003
Posts: 0
Re: Please overlook my turbo build, And comments welcome
Originally Posted by Spooling Darkness
D16z6
Sounds good
Hf manifold- Going to gasket match it.
Also good.
T3 Garrett Turbo 42/48 Internally gated to 10psi
woot
440cc Percision Injectors
Good
Front Mount Intercooler, Probly gonna get this from Egay.
Shop around, you can find some for hella cheap
I think im gonna get the intercooler piping from West Coast Turbo, cuase i went with
Tuner Toys kit last time and cutting that ---- was a bitch, WCT is cut to fit. Unless anyone
knows of some egay sets that are cheap that are already cut to fit on a 92-95 civic, cuase the WCT kit it 169.00.
My cousin got his intercooler kit for like $110 or so, wasnt fut you had to do it your own but definitely worth it. Came with "chrome" pipes and couplers.
Im not sure if i should use Chrome or Uberdata, I have used Uberdata before but i have herd Chrome is better. My
ECU is already chiped for Uberdata, its a p06 to p28 convert i guess. so does that mean all i need is a basemap chip?
*Crome.....but its really a personal choice. I'll let people who know more about each chime in.
Should i go with 3 inch downpipe or 2.5. Is 3 overkill?
Whichever you like, both will work fine. Bigger the better though.
Autometer Boost Gauge
boost and vacuum?
Egay RFL BOV cuase the TurboXS one is probly gonna be to expensive
BOV is always good to have :P
Stealthmode Oil line kit and Oil restrictor.
Stevemode is always a good way to go.
Any help would be appreacted. Thanks guys
You're welcome.
Sounds good
Hf manifold- Going to gasket match it.
Also good.
T3 Garrett Turbo 42/48 Internally gated to 10psi
woot
440cc Percision Injectors
Good
Front Mount Intercooler, Probly gonna get this from Egay.
Shop around, you can find some for hella cheap
I think im gonna get the intercooler piping from West Coast Turbo, cuase i went with
Tuner Toys kit last time and cutting that ---- was a bitch, WCT is cut to fit. Unless anyone
knows of some egay sets that are cheap that are already cut to fit on a 92-95 civic, cuase the WCT kit it 169.00.
My cousin got his intercooler kit for like $110 or so, wasnt fut you had to do it your own but definitely worth it. Came with "chrome" pipes and couplers.
Im not sure if i should use Chrome or Uberdata, I have used Uberdata before but i have herd Chrome is better. My
ECU is already chiped for Uberdata, its a p06 to p28 convert i guess. so does that mean all i need is a basemap chip?
*Crome.....but its really a personal choice. I'll let people who know more about each chime in.
Should i go with 3 inch downpipe or 2.5. Is 3 overkill?
Whichever you like, both will work fine. Bigger the better though.
Autometer Boost Gauge
boost and vacuum?
Egay RFL BOV cuase the TurboXS one is probly gonna be to expensive
BOV is always good to have :P
Stealthmode Oil line kit and Oil restrictor.
Stevemode is always a good way to go.
Any help would be appreacted. Thanks guys
You're welcome.
10-20-2006, 08:14 PM
#5
0.5 BAR
Thread Starter
Join Date: Oct 2006
Posts: 95
Re: Please overlook my turbo build, And comments welcome
Here is the turbo, Not a bad price, i submitted a offer of 200 bucks, and he accepted it. Looks clean
http://cgi.ebay.com/ebaymotors/ws/eB...0573007&rd=1,1
http://cgi.ebay.com/ebaymotors/ws/eB...0573007&rd=1,1
10-20-2006, 08:20 PM
#6
3.0 BAR
Join Date: Aug 2004
Posts: 2,028
Re: Please overlook my turbo build, And comments welcome
Prolly could have found one cheaper but atleast that one is clean. I wouldn't buy anything from WCT, there's been a lot of horror stories on here about their shipping being slow or non existant.
10-20-2006, 08:32 PM
#7
0.5 BAR
Thread Starter
Join Date: Oct 2006
Posts: 95
Re: Please overlook my turbo build, And comments welcome
Originally Posted by N1ghtM0nkey
Prolly could have found one cheaper but atleast that one is clean. I wouldn't buy anything from WCT, there's been a lot of horror stories on here about their shipping being slow or non existant.
10-21-2006, 12:48 AM
#8
0.5 BAR
Join Date: Sep 2005
Posts: 67
Re: Please overlook my turbo build, And comments welcome
Originally Posted by Spooling Darkness
Here is the turbo, Not a bad price, i submitted a offer of 200 bucks, and he accepted it. Looks clean
http://cgi.ebay.com/ebaymotors/ws/eB...0573007&rd=1,1
http://cgi.ebay.com/ebaymotors/ws/eB...0573007&rd=1,1
10-21-2006, 09:07 AM
#9
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re: Please overlook my turbo build, And comments welcome
Shipping costs: US $32.46
UPS Ground
Service to 28806, United States
(more services)
Calculate
UPS Ground
Service to 28806, United States
(more services)
Calculate
