Please help, where should I "T" off the block, near valve cover
 

Ok don't get this wrong, i'm not going to "T" everything where the stock oil press sensor is, i'm going to run a oil feed line from there to near my valve cover and put a "T" around there for my oil gauge etc. Anyone know where i can attach the "T" near the valve cover or around? I don't like "t"ing off the firewall cuz of engine flex.. don't trust my slack on the line

Re:Please help, where should I "T" off the block, near valve cover
 

zip ties!!!!! ;)

Re:Please help, where should I "T" off the block, near valve cover
 

yeah dood, just zip tie it to an existing oil/vac/coolant line somewhere in the vicinity.

we actually had a plastic clip on the block that we ziptied ours to.

Re:Please help, where should I "T" off the block, near valve cover
 

On My Dohc there was 2 threaded stems on my intake I used a factory style clamp and bolted it there. If I get time today when i tear the turbo off I will take pics.

Re:Please help, where should I "T" off the block, near valve cover
 

i just put mine on the firewall, i have hella slack in it.. the engine dosent move more than 3 inches side to side, if that.