racinskittle

(shot of front of car)



(shot of engine bay)



(shot of turbo and piping and oil feed line)



(side shot of everything)



(gauge pod and gauges)



(other side of pod and gauges)



(oil line "T" in the back of the block) (sender and feed line)



(right side of car and IC piping)



(VAFC temporary placement)



(again)



(Charge pipe and BOV)



(complete shot of all of IC piping)

Well here's the word on the car.

There are no pics of my oil return line going from the turbo to the oil pan because I didn't get done with that until REALLY late and matt had already left. (ill have some pics of that later in the week hopefully) Looks nice though but i need some thoughts on it. (cuz it's backwards lol) (but im gonna pour a cup of oil down it just to test to see if it flows well)

It's all finished EXCEPT i forgot to clean out the piping because there are metal scraps in there from the cutting and stuff Also I didn't add oil yet either.

If I would have done these two things I could have started it, but as everyone knows from before, the o2 housing is facing the block and i dont really want to melt it with 800 degree heat. I tried to go to Top Street in milwaukee to get a temporary downpipe made that goes to the road but they were friggin closed So i still haven't started it.

BUT this gives me a chance to order the STRAIGHT! o2 housing from cheapturbo.com for an internal wastegate, that way ill have plenty of room and can get a custom dowpipe made and it wont face the block. (like this one)
It's only $25 and it seems to work well, i've seen smoe pics from someone else. So i hope that answers ur question. If it doesn't let me know.

For the thank you's.

Friend matt... He's helped me, taken pics, hosted pics this WHOLE TIME for selling parts and everything. So he get s a huge

Paul Vang Sent me some AMAZING oil lines and fittings. He's a really nice guy and has helped me a lot with these things. Also has GREAT customer service as too! Get ur stuff from him!

Havok Racing Made me the kickass manifold in REALLY short notice! Thanks! It fit perfect!

My Brother .....bitching like usual

Friend Dan For taking and hosting some of my other pics of my turbo parts

DriveLine Debuque Iowa.....Got the BOV, IC, and oil pan welded for a such a cheap price u'd ---- urself! Damn good guy too.

And everyone on this board I definately could NOT have done it without you guys. You guys are amazing! From all my dumb questions toooo good ones, you guys were always there with all the good answers. THANK YOU!

This is friggin awesome



[/B] Specifications[/B]

Turbo D16Z6 @ 7psi soon (internal wastegate)

Air Research (small) T3 turbo 60 trim AKA "Destroyer"
Starion FMIC
Custom manifold made by Havok Racing
DSM 450cc injectors
Resistor Pack
2.25 piping from turbo to IC and 2.5 from IC to throttle body
Gasline hose for couplings
1G BOV
Oil Lines (paul vang)
3 pod gauge... Autometer Boost, and A/F
B&M fuel pressure gauge
VAFC running the "Hack"
O2 housing from cheapturbo.com (non angled) to 2.5 Downpipe to STOCK EXHAUST ......
3" Mccord Power Plate with a Jegs Y cut out (This will be installed next weekend and ill have pics up of how this bad boy looks) Should kick ***

Walbro 255 hi flo fuel pump (stock for now until I get tuned on wideband for 10psi)

Soon to install
My Spec stage 3 6 puck clutch
12lb ACT aluminum flywheel (from B series on HT.com)


Soon to get:
Innovative wideband for tuning

racinskittle

OH! i need a straight volvo/saab O2 housing!!!!

By This week friday.. cash on hand
My o2 housing it angled toward the block and I dont want to risk it! I need a straight O2 housing for making a downpipe off of! Internal wastegate! It's a 5 bolt on the ehxuast side, but i dont car how many bolts the DP flange will have to be (2 or 3) SOMEONE LEMME KNOW IF YOU HAVE ONE

projekteg

you can go back and "edit" your original post, thus eliminating the need for four consecutive post's car looks good though

racinskittle

lol will do, just didn't want it so jumbled.

rudebwoy

nice setup! love the manifold, but I think you could have used less piping on the right side, you may lose some pressure from too much piping, but everything else nice.

turbocivic17m

Hah!!! I remember that intercooler on ebay like 5 or 6 months ago. I was going to buy it but didnt like all the red paint on it. Good work.
P.S--- I have a skittle car to. Ecept mine is purple

rudebwoy

I remember it, I bid on it and lost, I'm glad because it gave me enough time for customcoach to came to the rescue.

racinskittle

Thanks! Keep the replies comin!

Yeah, it was actually physically impossible to run the piping the way i would have liked to so now im stuck with that Just not enough room and the way the oil lines worked out. Ill see how it goes.

Also, on the IC i actually didn't get this one off of ebay In fact, i dont even have an account.

I bought this off a starion/conquest forum... Actually I bought 2 for the price of one. I got an AMAZING deal on that thing! ($70)
Thanks for all of the replies and ill keep u updated, im a little worried about the piping on the car though now I've seen some other setups and they had it like mine, so hopefully it'll work. If i woulda gone under the car i believe i'd of used the same amount actually i hope

turbocivic17m

Connectors from NAPA? I have some similar, if not the same as te ones on your setup.

racinskittle

yup straight from napa