pics of my setup :)
A few pics of how the conversion is going on.
http://www.uploadit.org/files/201003-CamPic11.jpg http://www.uploadit.org/files/201003-CamPic15.jpg http://www.uploadit.org/files/201003-CamPic20.jpg comments are appreciated. |
Re:pics of my setup :)
looks good bro!! ;) clean setup. what bov are you using, i cant see one in pics? also what turbo is that, T3? Let us know if the manifold starts to crack and ---- since it looks just like an OBX :-X
|
Re:pics of my setup :)
good deal, that dohc looks good with a turbo :P
|
Re:pics of my setup :)
im just wondering which BOV to buy, i can't decide between the blitz dual drive one and the hks ssqv?
I got the manifold before i read about all the ---- reviews about them, it is a stone racing one from ssautochrome on ebay, im hoping that it doesnt crack, but if it does ill have to get another one! :'( i saw it and thought it looked good so bought one! The Turbo is a oil cooled Volvo unit, i was lucky wen i picked it cos its got a tag on it that says it has been reconditioned in 2002! i only paid £40 ($65)! |
Re:pics of my setup :)
looks good man, can't wait to see my b16 with a turbo :P too bad those manifolds are ----, cause they sure look good :-\
|
Re:pics of my setup :)
rhd= nice ;D
|
Re:pics of my setup :)
i got a blitz dd for sale $175 shipped let me know.. sounds really nice..
|
Re:pics of my setup :)
has it got both trumpets? the open ended one and the filter one?
|
Re:pics of my setup :)
Wow!Are my eyes fucked up or is that a 3 inch charge pipe?Nice looking setup though.
|
Re:pics of my setup :)
you know you can get that manifold braced and supported really good from lovefab.com he charges like 75 bucks to weld supports all over it :)
|
Re:pics of my setup :)
yes that is a 3" charge pipe, im hoping that i don't get too much of a pressre drop from the intercooler because that piping looks soo cool in the engine bay!
|
Re:pics of my setup :)
Lookin nice man! T3's own :P.
Let us know how she runs! B16A3? |
Re:pics of my setup :)
no its a b16a2, cant wait for it to be finished! just the oil lines and downpipe to make!
|
Re:pics of my setup :)
---- me good progress dude!! :o. You have really got the whole project movin along now!!!
Just one thing though that Volvo turbo you are running, Isnt that gona be a bit small for a B16? Dont get me wrong here its gona spool ------ quick and lay the power down hard and fast, but the net result of that will be:- ---- loads of tyre smoke!!! And almost zero traction In any of the lower gears!! :o Im just thinking that maybe your gona have far too much power low down in the rev range and then be running out of puff, just when the B16 is just getting into the upper part of its power band!! Just a thought!! No doubt its gona be fun trying it out though!! |
Re:pics of my setup :)
the volvo turbo is from a 2.3l so i was thinking that the turbo would be fine to spool all the way through the revs range.
|
Re:pics of my setup :)
it will spool and all but you better do somthing about the way that turbo's flange is. I had teh same turbo as you and it definatley does not bolt right up to a normal t3 flange. that circular counter-sunk hole must be ground down (take a mm or 2mm of material off) of the flange on the turbo or else all your boost is going to leak!!!
|
Re:pics of my setup :)
beautiful!
|
Re:pics of my setup :)
|
Re:pics of my setup :)
second picture= a wrench and a hammer ;D
|
Re:pics of my setup :)
holy ----!!! it is right hand drive!!! straight JDM baby!!! i likes even more now!! :o :o :o must be weird shifting with that left hand, eh? all is well!! props
|
Re:pics of my setup :)
how do you guys know its a right hand drive? you cant even see the steering wheel!
|
Re:pics of my setup :)
because of the battery and master cylinder......
|
Re:pics of my setup :)
exactly projekteg! ;)
|
Re:pics of my setup :)
aahhhhh i get ya!
|
Re:pics of my setup :)
Looks good man, but isn't the turbo kinda small?
The volvo doesn't rev up to +8K rpm's. |
Re:pics of my setup :)
il find out after the weekend! thats when it will be done!
muwhahahaha! |
Re:pics of my setup :)
no bumper support? should fit with that intercooler.
|
Re:pics of my setup :)
A bit like that???
http://www.uploadit.org/files/241003-intercoolio.jpg |
Re:pics of my setup :)
WOW
that is phuckin beau T fool :o |
Re:pics of my setup :)
dammnn those rides are nice man
My crx is rusted with a lot of dents. ohh well I don't give a ....... It only has to be fast and turboed..that's allt hat matters |
Re:pics of my setup :)
i have a turbo xs RFL ill sell for $100 shipped.
|
Re:pics of my setup :)
to the uk?
|
Re:pics of my setup :)
what sux is that it looks like an ssautochrome turbo manifold. i could be wrong.
|
Re:pics of my setup :)
Originally Posted by kain
what sux is that it looks like an ssautochrome turbo manifold. i could be wrong.
Nice setup. Everything looks damn good. That front view looks killer. Have you posted this before? I remember that building in the background. I know I have seen that on this board before. ??? __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
All times are GMT -5. The time now is 11:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands