PCV system??
I was told to upgrade my PCV system on my b18b when I turbo my car. Does anyone know what I shuld do about this?
|
Re:PCV system??
yeah put a filter breather on your valve cover nipple..
|
Re:PCV system??
build/buy a catch can... route the hose from the valve cover nipple to the can... and from the can to before the turbo... plug the nipple on the intake manifold
that'll keep things clean under the hood and keep it semi legal... just make sure to empty the can occasinly. mark |
Re:PCV system??
donalson go learn to hook up a catch can before u give out false information.
|
Re:PCV system??
What i did on my last car. I put some vacumm hose on the Nipple, Than put a breather on the end of that and zip tied it around something in the back of the engine. I had it so any oil that did drip/spray out it would hit the ground and not the engine. Not legal. But. It worked for me. The breather never fell off.
|
Re:PCV system??
I was told not to just put on a filter on the valve cover nipple....something about "piston ring and piston ring land damage can occur". What is the solution?
shortyz...what is the correct way to hook up a oil catch can? By the way what is an oil catch can? |
Re:PCV system??
Originally Posted by shortyz
donalson go learn to hook up a catch can before u give out false information.
mark |
Re:PCV system??
somone posted this on another board. $3 catch-can pretty sweet idea
http://www.tgilmore.com/talon/catchcan.html mark |
Re:PCV system??
That web site is doing it on a car that is factory turbo charged. I was told it was different for a car that is aftermarket turbocharged.
|
Re:PCV system??
It's the same for both. I just used a hose straight down to the bottom with no filtering at all. Well, over here they don't give a ----.
|
All times are GMT -5. The time now is 01:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands