HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   PCV Setups?? (https://www.homemadeturbo.com/forced-induction-7/pcv-setups-38994/)

MAJORAHOLE 05-05-2005 09:56 AM

PCV Setups??
 
anyone have any pics??? i need to figure out the setup i wanna use. but i can't find one for only having a filter off the turbo.

projekteg 05-05-2005 01:21 PM

Re: PCV Setups??
 
http://theoldone.com/components/breather/ actually taps in to the back of your block and elimnates the stock pcv system, the only 'real' crank case breather kit that i'm aware of, not some cheap catch can with a 'vacuum' source from the turbo intake.

MAJORAHOLE 05-05-2005 01:33 PM

Re: PCV Setups??
 
thats decent, but its for b-series and it $170. any cheap alternatives besides the catch can and vacume source????

Jeter2Karaffa 05-05-2005 01:33 PM

Re: PCV Setups??
 
http://www.beesandgoats.com/boostfaq/PCV_turbo_2fit.jpg

or there's this
http://www.beesandgoats.com/boostfaq/PCV_turbo_1fit.jpg

tegboi 05-05-2005 01:44 PM

Re: PCV Setups??
 
is it really needed? i have mine from the back of the block, into a custom can, with the hose on bottom, with steel wool inside packed, then the top line goes to the intake tube..

Spenser 05-05-2005 01:53 PM

Re: PCV Setups??
 
yes, the PCV valve is what the problem is. it doesn't like boost.

MAJORAHOLE 05-05-2005 02:12 PM

Re: PCV Setups??
 
i'm only gonna have a filter on my turbo, no piping. any other ideas???

projekteg 05-06-2005 08:00 AM

Re: PCV Setups??
 
if you've ever seen all the ---- that gets in a catch can, you'd have second thoughts about routing it back in to your turo intake. even if you have a true 'baffled' can which cost about 80 bucks just for the can, some of the stuff still gets by and sucked in to your intake, which in turn lowers octane rating and can cause detonation.

MAJORAHOLE 05-06-2005 08:17 AM

Re: PCV Setups??
 
well what does every one else do then???

projekteg 05-06-2005 08:25 AM

Re: PCV Setups??
 

Originally Posted by MAJORAHOLE
well what does every one else do then???

most people honestly don't do anything :-\ yeah, honda's pcv system is gay for boost b/c it's a one way check valve basically and it closes when it see's boost, but if you don't rig up an actual crank case breather of some sort (like from the link i posted, you could make one for a d series, but would still need to buy the baffled can), then you're really just wasting your time with anything else, worst case scenerio, you get a little blow by under boost, in that case, just run a gay catch can off your valve cover to catch the oil/vapor :-\


All times are GMT -5. The time now is 02:32 AM.


© 2024 MH Sub I, LLC dba Internet Brands