PCV anyone?
Has anyone here ever use PCV pipes for the charge piping on a turbo setup?
Home Depot style. :1 |
Re: PCV anyone?
Originally Posted by 1991civicsi
Has anyone here ever use PCV pipes for the charge piping on a turbo setup?
Home Depot style. :1 no one uses PCV pipe..... Yes, actually...... my friend used it for his 240...... he turboed it and used PVC for his BOV connection and a couple of things................. just buy some metal......... mandrel bent if possible..... if your going to go MADDDDD cheap... why not use some crush bent exhaust piping from like canadian tire (yes I'm Canadian), or parts source or whatever you guys have in the usa.......... but crush bent pipes will cause serious velocity issues...... it just plain SUCKS for flow...... buy some mandrel stuff.... it only cost be 300 for all my piping, 5 ply silicone connectors, and my time to put it together........ that 300 was CDN by the way.. Lee |
Re: PCV anyone?
Hel Ya I rocked that ---- for a year :6 One thing is make sure your pipes have a bead, cause those are more likely to pop off than silicone. They also don't hold up to heat very well. I had one 90 degree one that blew out the side 3 times. Never had any problems with the straights.
|
Re: PCV anyone?
this is hmt of course pvc and the abs pipe just not right off the turbo. there is a bunch of car ---- at home depot just not labeled right
|
Re: PCV anyone?
What is PCV piping?
Just buy some mandrel bends. To the person who spent 300 on charge piping, you such at life. |
Re: PCV anyone?
Originally Posted by Snafubmx234
What is PCV piping?
Just buy some mandrel bends. To the person who spent 300 on charge piping, you such at life. I needed 9 90degree bends......... and a whole wack of staight ---- ........... oh and 300 cdn....... is like 240USD.... thats NOTHING ........... Lee |
Re: PCV anyone?
uhh, your talking about charge piping right?
boost doesn't flow, it fills. doesn't matter if its mandrel, crushed, or whitey bends- just changes its appearance. i had a hard time trying to figure this out at first, until a math teacher and my auto teacher explained it to me. :1 |
Re: PCV anyone?
Originally Posted by boostedJ
huh ???? for mandrel bent s.s. with 5 ply connectors ????
I needed 9 90degree bends......... and a whole wack of staight ---- ........... oh and 300 cdn....... is like 240USD.... thats NOTHING ........... Lee Coulda got by with 3 less plys and aluminized steel. :3 Welds also are way better than clamps. Only couplers should be in the IC, TB, and Turbo. |
All times are GMT -5. The time now is 04:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands