Outlet flange for a Misti te04h
#2
Re: Outlet flange for a Misti te04h
If your talking about the downpipe then:
https://www.homemadeturbo.com/forum/...?topic=25834.0 he's got them $27 if you need the stock piece from chrysler let me know I have one and don't need it. If your talking about the compressor outlet I might have a housing that would be easier for you let me know what your working with. I got spares Teo4H/ Td04. Not looking to make money just wanna help.
https://www.homemadeturbo.com/forum/...?topic=25834.0 he's got them $27 if you need the stock piece from chrysler let me know I have one and don't need it. If your talking about the compressor outlet I might have a housing that would be easier for you let me know what your working with. I got spares Teo4H/ Td04. Not looking to make money just wanna help.
#3
Re: Outlet flange for a Misti te04h
NAsucks,
I was just looking for the down pipe flange. I sent a e-mail off to those guys. Do you have a exhaust housing. I broke a bolt off and it's was hell getting it out. Now I just have a hole going thru it, no threads. Let me know if you can help out. I can send some cash and have UPS come pick it up.
Randy
I was just looking for the down pipe flange. I sent a e-mail off to those guys. Do you have a exhaust housing. I broke a bolt off and it's was hell getting it out. Now I just have a hole going thru it, no threads. Let me know if you can help out. I can send some cash and have UPS come pick it up.
Randy
#4
Re: Outlet flange for a Misti te04h
naw I cut my other one up trying to make a flange I got mine from them for around $30 I bought it with some other stuff, So it might be a little more by itself. But I do have three compressor housings and three bearing housings. And a wastegate actuator. Let me know if you need any of that.
#5
Re: Outlet flange for a Misti te04h
If I were to do it again, I'd just buy the flange instead of making it. Make sure your main pipe comes out forward enough to allow room for the wastegate merge between the engine. The lower flange bolt is right under the DP so theres another area to look out for. I just finished the majority of mine yesterday
#6
Re: Outlet flange for a Misti te04h
Yeah I'm gonna buy it I've got it about half way done and the ocal machine shop wants $45 min to surface it once I get done. Sooooo $25 From Weir or ghetto *** flange for $45. I think I'll just buy one. Because of the way that i have to clock it I was gonna run a Ext WG. We'll see. Hey I do have the stock down pipe If you need that.
DL
DL
#7
Re: Outlet flange for a Misti te04h
I got a stock peice of crap too. After I got everything clocked right. The stock peice goes right into the radiator. That doesn't work for me at all. I can't run a half size radiator either because it will for sure over heat. I run with the pedal down too much and I have over heated a stock motor in zero degree weather. I'm running the stock waste gate it just took some time to get my adapter to work, but it clears by a ---- hair. I made two flanges and welded a peice of pipe between them.
Randy
Randy
#8
Re: Outlet flange for a Misti te04h
Yeah I'm working with a Sentra but Ididn't even think about makeing a bracket DUH !? that'll save some dough. Have you use that REDLINE water wetter. I have and it kept my temps down FLorida A/C running and a led foot TOO. Lots of burnouts too! Good Luck post some pics if you got any?
Dan
Dan
#9
Re: Outlet flange for a Misti te04h
I'm actually sell Redline products from my shop. I use about 2 bottles for the full size radiator. The problem is we run about 80 percent at WOT per lap for over 2 hours. It just doesn't keep cool. How do I post pics? I have some pics of the car and my adapter. I suck at computers!
Randy
Randy