ONLY ONE VACUUM OUTPUT
 

hey guys, i started on my turbo setup yesterday. i bolted up the mani, turbo and had the Downpipe made. tommorow i plan to do the intercooler and the charge pipes. while i was working today, i relized that my motor only has one single vacuum nipple, which is the one that the fuel regulator uses.

will that one line be able to support the BOV, FMU, wastegate, regulator, and boost gauge?

its a D15B (jap spec single vtec)

thanks

Re:ONLY ONE VACUUM OUTPUT
 

well there should be at least one more where the brake master cylinder gets hooked up...and the actuator can get hooked up to the nipple on the turbo if it has one

Re:ONLY ONE VACUUM OUTPUT
 

One word ... "T" ;D

Re:ONLY ONE VACUUM OUTPUT
 

lol yea i only have the vacuum line for the fpr and brakes..so i just got a vacuum manifold works good ;D

Re:ONLY ONE VACUUM OUTPUT
 

i woudlent want top use the breaks as your vaccume source


its called 4 T's= manifold -TTTT -fuel regulator

Re:ONLY ONE VACUUM OUTPUT
 

thanks guys, i just wanted to make sure that it wouldnt make the vacuum source weak or anything like that.

ill let you know how it goes