Only getting 2-3 psi and it drops off at high rpms to like 1 psi
 

im not using gaskets and im running one of those old adapter plates from that other homemade turbo website, will that cause the boost to not hold and why its so low????

Re:Only getting 2-3 psi and it drops off at high rpms to like 1 psi
 

" im running one of those old adapter plates from that other homemade turbo website"

What are you talking about? the style we use? because we dont sell them.

Is your actuator cocked open? double check all your charge piping, and make sure you have ZERO leaks, it doesnt take much to loose a few psi.

JEff

Re:Only getting 2-3 psi and it drops off at high rpms to like 1 psi
 

nah im referring to the twin turbo crx homemade turbo site's adapter plates. thanks for the reply.

Re:Only getting 2-3 psi and it drops off at high rpms to like 1 psi
 

get some gaskets !!! ;D

Re:Only getting 2-3 psi and it drops off at high rpms to like 1 psi
 

take some pics..

Re:Only getting 2-3 psi and it drops off at high rpms to like 1 psi
 

would even pinhole leaks cause the lost of boost to be this extreme???????? cause i got a few, there not very big at all. gaskets is the last ditch effort for me cause its the most expensive. its weird first gear i dont get much at all and 2nd i get 4.5 and it drops off at lik 5500 and 3rd i get 6 psi and it drops off at 5500. feels slow...

Re:Only getting 2-3 psi and it drops off at high rpms to like 1 psi
 

my car in first doesnt boost at all until second and up.pinhole leaks if more than one can add up and i bet that is what your problem is unless its your wastegate??and gaskets arent that expensive, u should get them anyways. :D

Re:Only getting 2-3 psi and it drops off at high rpms to like 1 psi
 

Smear some ---- over the pin holes..(JB weld or something) and check the acculator rod. that was my problem.
Also are you from TX by chance?

Re:Only getting 2-3 psi and it drops off at high rpms to like 1 psi
 

yes im from tx, i go to kennadale and ennis every once in a while. u from tx? ill try that jb weld stuff then after that i guess the only thing i can do is get some gaskets.

Re:Only getting 2-3 psi and it drops off at high rpms to like 1 psi
 

yeah I talked to you before I bet...You had the Gold HB and the blue one right? Maybe your brother..I had the Camo 89 all strippped out with the B18A and the red 92 d16z6...I talked to you at Kenneadale a few times..
But yeah the JB weld should work, just let it sit for a while