oill feed b series
02-08-2003, 01:14 AM
#1
0.5 BAR
Thread Starter
Join Date: Feb 2003
Posts: 122
oill feed b series
I have read in the other topics getting oil feed lines near the vtec solenoid is bad?! is it really that bad? or will it work? is it still better to get oil feed from the block where the sender is!? Thanks in advance!
02-08-2003, 04:19 PM
#6
Guest
Posts: n/a
Re:oill feed b series
Here here.
Go with what works is tried and true.
That's one thing I have found out about Honda modification. It's been done. There is rarely anything that hasn't been done to a Honda. So, research, and see that "most" do, and do it. No harm in doing right. Saves you time, and money.
Go with what works is tried and true.
That's one thing I have found out about Honda modification. It's been done. There is rarely anything that hasn't been done to a Honda. So, research, and see that "most" do, and do it. No harm in doing right. Saves you time, and money.
02-10-2003, 04:15 PM
#7
Guest
Posts: n/a
Re:oill feed b series
Originally Posted by scorch fx
I have read in the other topics getting oil feed lines near the vtec solenoid is bad?! is it really that bad? or will it work? is it still better to get oil feed from the block where the sender is!? Thanks in advance!
b18b head tho.
02-10-2003, 11:25 PM
#10
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:oill feed b series
Yes, they do have it, dont even consider on using that as an oil feed.. it will smoke your turbo fairly quickly, it does not pump out enough oil.. its a 10mm bolt right off the front of the head near cylinder 4.
Jeff
Jeff
