HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Oil return thoughts (https://www.homemadeturbo.com/forced-induction-7/oil-return-thoughts-89334/)

ichbinsobose 02-22-2008 05:34 PM

Oil return thoughts
 
2 things
1) Whats the cheapest oil return line you nigs use? I have some 1/2" ID goodyear hydraulic hose that I want to use but I should probably buy something for back up.

2) If you have a top mount with turbo 30" above the oil pan, do you still need to drain the oil below the oil level?

HMTguy 02-22-2008 05:37 PM

Re: Oil return thoughts
 
You can use whatever's cheap, fuel line works too.

You always want to drain the turbo oil above the oil level in the pan.

ichbinsobose 02-22-2008 05:44 PM

Re: Oil return thoughts
 
I would never have thought about draining below the oil level until I saw some bf.c top mount turbo guys running drains through the oil pan drain bolt with no issues. Argument was, the oil would not back up in the hose much beyond the level of the oil in the pan.

LilWayne 02-22-2008 06:20 PM

Re: Oil return thoughts
 
Old honda 5/8 heater core hose it always works for me.

95_civic_lx 02-22-2008 06:45 PM

Re: Oil return thoughts
 
i used tranny fluid hose from AutoZone it was like $5 for it

crx2211 02-23-2008 03:56 AM

Re: Oil return thoughts
 
Old air compressor hose works wonderful too. The few psi of pressure the return sees isn't hard to contain. Now feed is something joo wanna get the bawler partz for.

taiajam 02-23-2008 12:10 PM

Re: Oil return thoughts
 
i used this
http://www.supplierlist.com/photo_im...arden_Hose.jpg


All times are GMT -5. The time now is 04:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands