oil return question
 

does it have to be pointing straight down or is this ok

http://home.comcast.net/~aztecwarrio...9/site1050.jpg

i think it should be considering theres pressure behind it... but what do i no

Re:oil return question
 

No, that will have to be rotated. I dont think you want you oil return line shooting straight out like that, rotate the housing so that it face's down.

Re:oil return question
 

no pressure, gravity fed.

Re:oil return question
 

just rotate the center section. i had to the same to me T3 so it could face straight down..

Re:oil return question
 

---- im trying but one ------- bolt wont come off any one got and suggestions

Re:oil return question
 

its the one right underneath the water fitting all i can get is a open end wrench on it but it just strippes it... :'(

Re:oil return question
 

a pic might help...maybe take the water fitting off first?

Re:oil return question
 

I'd start by soaking it in PB Blaster for about 20 mins and then see if you can lock a pair of vice grips around it and get it moving. If that doesn't work I'd heat it up with a torch and try again.

Post a picture of the stuck bolt and I'll be able to give you better info. If you have the semi circle retaining rings holding it in place, I'd just cut it with a dremmel to get it away from the bolt. Then you can take the housing apart and get to the bolt. I broke a bolt off in my housing and ended up having to get a new one. That little retainer is about $5; a new housing is $70-200. Do the math ;)

Re:oil return question
 

heat it up

Re:oil return question
 

Be care ful.I had one break on me on one of those chrysler T3s.Those things are a pain in the ass >:(.