Oil return line???
 

i didnt know which topic to put it in so its staying here..... anyways i have to take off the turbo to get emissions done. my question is - can i route my oil feed line into my oilpan where the oil return would go? or would that be bad because i am giving my bottom end pressure? can anyone help me?

Re: Oil return line???
 

lol, once it comes out of the line and goes into the pan its not pressureized anymore. you might loose allot of oil pressure by doing that seeing as how theres no restriction on the line anymore. just find somthing to plug the feed line or take it off

Re: Oil return line???
 

that would be a bad idea. pressure would drop in your engine/head. Get an AN fitting and fill it with JBweld. Instant oil-feed blockoff tool. Either that or get an AN to NTP, an NTP female-female and an NTP male blockoff fitting.

Re: Oil return line???
 

Ya, Depending on the setup you have. If it's hose bard, just grab a male hose barb, a double female union and a plug on the other end of the union.

If its -AN fittings, just find some adaptor an plug it with a thread in plug.

Re: Oil return line???
 

buy an oil restricter valve from stealthmode and shut it closed

Re: Oil return line???
 

assuming you have a tunertoys fitting, just go buy a 1/8th Plug and plug up your oil feed, and get a rubber hose and a big bolt to block off your return.

Re: Oil return line???
 

that is some ghetto ass shita O0