so i made my manifold and i made it so it would clear the stock radiator but i cant have the manifold and then oil filter on at the same time. look at the pics you will see that i could use a relocation kit but i cant find one that is thin enough. the only ones i can find have the lines coming strait out, i need one that has lines coming strait out the sides.

 

http://www.jegs.com/webapp/wcs/store...45590_-1_10467

then use 90 degrees fitting right off the adapter.

But even with SS #8AN lines they will still get HOT!

 

thanks dude but i found an even better one on there
http://www.jegs.com/webapp/wcs/store...45592_-1_10467

 

Nice mani on that 5e

 

thanks, it was my first tig project

 

good to see a tercel owner on here. look at the thread that i just started. pics of my tercel are on there. if you were from tercelonline.com and the tercel network. it just might look familiar. i forgot my password for to. wish i could get it back though. oh well

 

this is why most of us toyota nogs build manifolds that put the turbo off to the side like the stock 3s location, or even farther :P

 

huh, oh well, i would imagine that if you could get an oil filter in there that the paint would cook off it. probably better that you have to use a remote setup. think of it this way. youll have a larger oil capacity system, chaning your oil will be easy as ---- and you can now add an oil cooler if it doesnt already have one. you can pick them up for like 25-25 bux at a local parts store.

 

yeah theres no way any filter could get in there

 

look on summit, they might have one a little cheaper