HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Oil feed line question (https://www.homemadeturbo.com/forced-induction-7/oil-feed-line-question-7981/)

junglesnake 07-28-2003 09:06 PM
Oil feed line question
 
What size T fitting will I need to tap the block on a 97 EX in both inches and -an for my feed line. Shouldn't a plumbing store carry that. Also, won't I need a female coupler to fit on one side of the T in order for my factory oil linr to hook back up to.

XDEep 07-28-2003 10:14 PM
Re:Oil feed line question
 
Originally Posted by junglesnake
What size T fitting will I need to tap the block on a 97 EX in both inches and -an for my feed line. Shouldn't a plumbing store carry that. Also, won't I need a female coupler to fit on one side of the T in order for my factory oil linr to hook back up to.
start by reading the new user faq at the top of this forum. basically you need a bspt threaded (hard to find) fitting to stick in the oil sender and from there you can tee into standard npt fittings. -4an is the standard but you might run smaller or restrict the oil somehow.
again, just read as there are a lot more details you need to know. good luck.

fastcivicboy 08-13-2003 07:02 PM
Re:Oil feed line question
 
1/8 bspt on block and -4 an ss braided line for the hose.

fastcivicboy 08-13-2003 07:05 PM
Re:Oil feed line question
 
heres a diagram i made hope it helps!

http://fastcivicboy.tripod.com/oilfeed.jpg


copy and paste the url in ur browser if gay trypod logo comes up


All times are GMT -5. The time now is 10:13 AM.


© 2024 MH Sub I, LLC dba Internet Brands