oil feed line on dsm turbo
 

On the dsm turbo that I got, the guy cut the hard line and just put a rubber line over top and used like 4 o'clamps on it. I'm debating about using a compression fitting attached to a barb fitting and then JB welding it all around to plug up any leaks. Any thoughts on this?

Re:oil feed line on dsm turbo
 

JEff has stated before that he's done it. Then again, I went with the SS braid.. to each his own.

Re:oil feed line on dsm turbo
 

they both work.. the clamp style with the hard line, may not be as pretty, but I guarentee it will hold no problem, we have never had one leak. Just use the correct pressure line. (high pressure) Napa sells 350psi line we use all the time.

Stainless steel lines work great too, but it all comes down to cost factor.

Jeff

Re:oil feed line on dsm turbo
 

im using 3000 Psi hydrolic oillines. got on 4 foot linewith AN-4 fittings with theblock fitting for like 40 cdn. worth it and it looks factory. All it is is stainless line coated with black around it basically....