HomemadeTurbo - DIY Turbo Forum
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   oil feed from head (https://www.homemadeturbo.com/forced-induction-7/oil-feed-head-75841/)

mike94se 03-29-2007 06:58 PM
Re: oil feed from head
 
Originally Posted by ososlohatch
thats what i was thinking but id feel bad if i fuct up the turbo
No busted ass ones around?

ososlohatch 03-29-2007 07:05 PM
Re: oil feed from head
 
Originally Posted by mike94se
No busted ass ones around?
bunch of em but i dont run busted turbos i sell them to kids like you ;D

Donald125 03-29-2007 07:11 PM
Re: oil feed from head
 
I`ve read somewhere before that the hoe gets oil only when vtec activate?? isi t a sohc vtec zc??

ososlohatch 03-29-2007 07:24 PM
Re: oil feed from head
 
non vtec zc dohc ..... ls's have it too

jdm_racer 03-30-2007 03:47 AM
Re: oil feed from head
 
I've seen it done. seems to work just fine.

whiterice 03-30-2007 11:18 AM
Re: oil feed from head
 
Many other makes use oil feeds from the head. I've seen it on a few Hondas but don't know the results.
Best way to find out is to hook up an oil pressure gauge with a sender at that spot. Make sure there is adequate oil pressure while driving.
Post a pic so everyone know what you are talking about.

ososlohatch 03-30-2007 01:23 PM
Re: oil feed from head
 
Originally Posted by whiterice
Many other makes use oil feeds from the head. I've seen it on a few Hondas but don't know the results.
Best way to find out is to hook up an oil pressure gauge with a sender at that spot. Make sure there is adequate oil pressure while driving.
Post a pic so everyone know what you are talking about.
ya ill report back either way, im thinking it will work, but i have to go over to my bro's tonight to get my gauge back i borrowed him so i can hook it up and see, finishing the w/g elbow right now cause the ching chang meow mani made the w/g hit the head :S

salmaan_ali 03-31-2007 02:05 PM
Re: oil feed from head
 
Personally i'd never use it, cuz the oil pressure on that place before vtec is very low. BTW what motor do u have? . but even if its a non-vtec motor i'd use a T with oilpressure switch and feed my turbo from it with a restrictor

mike94se 03-31-2007 02:08 PM
Re: oil feed from head
 
Originally Posted by salmaan_ali
Personally i'd never use it, cuz the oil pressure on that place before vtec is very low. BTW what motor do u have? . but even if its a non-vtec motor i'd use a T with oilpressure switch and feed my turbo from it with a restrictor
Originally Posted by ososlohatch
non vtec zc dohc ..... ls's have it too
:1

AJxr 03-31-2007 03:01 PM
Re: oil feed from head
 
whats wrong with the traditional spot?


All times are GMT -5. The time now is 06:13 AM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands