Oil Feed for b16?
 

im planning to put a tdo4 on a b16 engine. what is the safest and easy way to put the oil feed? what is the size of fitting block and sender? what size of oil feed?

Thanks in advance!

Re:Oil Feed for b16?
 

http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

Re:Oil Feed for b16?
 

thanks for the link. but, i want to make my own oil feed and specs. im planning to use ss braided line teflon/. does anyone know the fitting size.

Thanks again!

Re:Oil Feed for b16?
 

HOLY ---- BUDDY USE THE SEARCH BUTTON

there are so many topics on this its stupid..

http://www.honda-tech.com/zerothread?id=373528&page=2 - chipping
http://www.honda-tech.com/zerothread?id=366319 - clutch install
http://www.honda-tech.com/zerothread?id=67146 -oil return
http://www.honda-tech.com/zerothread?id=109160 -oil return line setup
http://www.honda-tech.com/zerothread?id=114490 -oil return line parts
http://www.honda-tech.com/zerothread?id=71999 -where to weld oil return
http://www.honda-tech.com/zerothread?id=119100 -oil return line
http://www.honda-tech.com/zerothread?id=119539 -oil pan welding
http://www.honda-tech.com/zerothread?id=119715 -oil pan welding
http://www.honda-tech.com/zerothread?id=118687 -oil grade to use
http://www.honda-tech.com/zerothread?id=118694 -ft for oil feed line
http://www.honda-tech.com/zerothread?id=118807 -oil feed line
http://www.honda-tech.com/zerothread?id=119681 -oil feed line
http://www.honda-tech.com/zerothread?id=93550 -part for oil feed line
http://www.honda-tech.com/zerothread?id=114436 -where to buy brass t for feed line
http://www.honda-tech.com/zerothread?id=126335 -oil t question
http://www.honda-tech.com/zerothread?id=125438 -another place to buy oil lines
http://www.honda-tech.com/zerothread?id=131447 -oil feed line an/npt connector ?
http://www.honda-tech.com/zerothread?id=134078 -feed diagram
http://www.honda-tech.com/zerothread?id=133948 -oil bpst fitting again
http://www.honda-tech.com/zerothread?id=144586 -oil feed line restrictor
http://www.honda-tech.com/zerothread?id=155510 -oil leaks
http://www.honda-tech.com/zerothread?id=158018 -oil feed 3' better
http://www.honda-tech.com/zerothread?id=156571 -oil pan bolts
http://www.honda-tech.com/zerothread?id=170223 -oil pressure readings
http://www.honda-tech.com/zerothread?id=168084 -oil feed fitting
http://www.honda-tech.com/zerothread?id=131450 -oil feed diagram
http://www.honda-tech.com/zerothread?id=195068 -oil pressu
http://www.honda-tech.com/zerothread?id=364948 -BSPT and NPT AN explanation. ***

now go away. >:( >:( >:(

Re:Oil Feed for b16?
 

Easy Shortyz, that's only his second post ::)

Don't want to scare everyone off

Re:Oil Feed for b16?
 

dood someone has to make a newbie post.. this is so annoying.. i am gonna rage.