Oil drain causing smoke?
my old drain line was a nice smooth copper one but it cracked and i replaced it with a stealthmode one. problem is i had to put on a 90 degree bend to keep it on a down slope into the pan. could this cause it to smoke/ could i check somehow.
reason is that a few things aren't normal: ~swithed from 20w-50 oil to 10w-30 for winter ~hasn't run in over a month ~burned a little before ~new drain line |
Re:Oil drain causing smoke?
post a pic
|
Re:Oil drain causing smoke?
Maybe the -10 line is a bit smaller than the copper line you were using. What's your oil pressure?
|
Re:Oil drain causing smoke?
Honestly, i dont think a 90 degree bend is good.
I remember seeing someone on here where their turbo was so low that the oil drain was damn near at 180 degree. I think over time that bend is gonna get clogged and oil is just gonna set and harden up in it got any pics? |
Re:Oil drain causing smoke?
ya, i'll get some pics when i go home this weekend. it's not that i wanted to make it 90 degrees. i have a 14b with a cx manifold so i don't think it's abnormally low or anything. the 90 was the only way to get it into the pan and still have a decreasing slope. what do you guys think about switching to thinner oil?
|
Re:Oil drain causing smoke?
im having the exact same problem now. Im going to have to use a 90 fitting coming off the turbo to even get the slope right. Im using a restrictor so there shouldnt be to much oil trying to get out of there at once. The hf sits the turbo so low thats all i can do
|
All times are GMT -5. The time now is 04:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands