Oil drain???
On my B18a out of a 92 5speed car. The oil pan looks pretty shallow and has me worried a little. When a motor is running 5000 rpm I would assume about 1.25 quarts of oil will be in the motor doing it's job, then there should be about 2.75 quarts in the pan. If I drill and weld my -10 an fitting on the pan at it's highest point, will that be above the oil level??? I know this matters and before I start just drilling, I would like to make sure. Has anyone tested this all ready?
Randy |
Re: Oil drain???
Just put it at the top and you will be fine.
|
Re: Oil drain???
Originally Posted by 90dx
Just put it at the top and you will be fine.
|
Re: Oil drain???
Originally Posted by jagojon3
And make sure it's between oil pan bolts, you'll be set
|
Re: Oil drain???
Thanks guys,
It is about half depth as my old D series pan. Just want to make sure. randy |
Re: Oil drain???
Originally Posted by jagojon3
And make sure it's between oil pan bolts, you'll be set
|
All times are GMT -5. The time now is 11:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands