OBD1 injector clips
 

ok so i went and picked some up fro the junkyard today ($1.36 for all 4) and i need to know which wire on my car, goes to which wire on the clips. as you probably know on the civic the wire to the ECU is the yellow wire with black line. then the other wires are different colors.

on the OBD1 injectors i have they all have 1 wire in common also which is the red with black line. then i have 2 with yellow wires and 2 with red. so the wire yellow/black wire from my car should be spliced wth the red/black wire right?

Re: OBD1 injector clips
 

I don't really think it matters. When I wired up my DSM injector clips and resistors, I just made sure to be consistant in which wires I connected.

Re: OBD1 injector clips
 

ok well im pretty sure i did it right. because on the stock clips there was one constant wire (yellow/black) then various other colors paired with it. and on the OBD1 there was one constant (red/black) and other plain colors paired with it. so im pretty sure i did it right i jsut wanted to make sure.