NOT SPOOLING!!!! B16A TURBO,
 

99 hatch with B16A, drag manifold, front mount intercooler, tial 38mm wastegate .4 bar spring, T3/T4,


we connected everything and it is not spooling, it goes from vacume to zero, and just site there even when we REV up to 6000 RPM.

any suggestions?

Re:NOT SPOOLING!!!! B16A TURBO,
 

could be a lot of things: turbo could be shot (what are the specs), leaks, bad wastegate

Re:NOT SPOOLING!!!! B16A TURBO,
 

Can you hear it spool at all? What are you using for a filter on the turbo? If its too restrictive like a cloth rubberband over it....you wont achieve any boost.

Its hard to say without some more info....

Re:NOT SPOOLING!!!! B16A TURBO,
 

I beleive you also must be driving the car to build boost. The engine has to have a load on it.

Re:NOT SPOOLING!!!! B16A TURBO,
 

right on the money

Re:NOT SPOOLING!!!! B16A TURBO,
 

Where did you get your manifold?

Re:NOT SPOOLING!!!! B16A TURBO,
 

super duper fucked bearing

Re:NOT SPOOLING!!!! B16A TURBO,
 

That was intelligent.. ???

Re:NOT SPOOLING!!!! B16A TURBO,
 

I dont think you got yo shiet hooked up correct. check all your vac lines and the fmu. and all that and stuff... quadcheck everyting. look at diagrams and compare.

Re:NOT SPOOLING!!!! B16A TURBO,
 

Make sure you have a load on the motor, the turbo will not make any boost unless there is a load. (Go drive it...)