Re: Noobish question. D16A6.
Originally Posted by c0mpl3x
just get the pistons, do you really trust the machine shop?
I would only deck the block enough to bing the piston to head clean ace in check then mill the head more to get he combustion chamber siize in check. I have hear of guys milling PR3 heads down far enough to get quench pads similar to the P72 heads, but I don't know if I really want to do that. I would imagine that the deck thickness would be getting awfully thin on either a B ore D series head for a FI application. |
Re: Noobish question. D16A6.
weld your head chamber get them remilled for ubar comression, 10:1 and a good tune = sex with a std free hooker on 2 for 1 night
|
Re: Noobish question. D16A6.
Originally Posted by c0mpl3x
weld your head chamber get them remilled for ubar comression, 10:1 and a good tune = sex with a std free hooker on 2 for 1 night
O0 |
Re: Noobish question. D16A6.
Originally Posted by snm95ls
Lol, that ---- isn't cheap. Unless I am mistaken.
O0 |
Re: Noobish question. D16A6.
dont go with vitaras and a 272. i hate it. on chris' advice im going back to stock cam when i have some time to rip it apart. get the srps and then do the 272 cam. not such a crazy low C/R
|
Re: Noobish question. D16A6.
Originally Posted by c0mpl3x
call hotrex
Originally Posted by the 13th round
dont go with vitaras and a 272. i hate it. on chris' advice im going back to stock cam when i have some time to rip it apart. get the srps and then do the 272 cam. not such a crazy low C/R
|
Re: Noobish question. D16A6.
Originally Posted by snm95ls
:l
Right, you are running stock deck height as well as stock head deck thickness. I understand that running the Vitaras with a Delta 272 would suck balls. I am not new to engines. I stated earlier what I have though about doing if I were to use the Vitasra pistons. |
Re: Noobish question. D16A6.
i had my head milled a fair amount, and im running 76mm bores, which according to fjt bumps compression by a half point or so. but i guess if you have it planned out go for it.
|
Re: Noobish question. D16A6.
Originally Posted by crxvtec91
Fjt is coming out with some longer rods that would bring up the cr with vitaras. BTW like I said before anthing over 300hp with that turbo wont really happend it just can't flow enough.
Lol, I thought that is what you were trying to to say, but I wanted to make sure. I don't plan on trying to puch this turbo to 300. If I finally get to that point, then I will upgrade to something like a 60 trim T3T04E. That one should suffice for anything I would want to do with this build. I wish I would have kept my HX35. :3
Originally Posted by the 13th round
i had my head milled a fair amount, and im running 76mm bores, which according to fjt bumps compression by a half point or so. but i guess if you have it planned out go for it.
|
Re: Noobish question. D16A6.
i cant say off the top of my head, no pun intended. it was the max that the guy suggested i should go. i want to say .20 if that makes anysense?or .020?
|
All times are GMT -5. The time now is 09:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands