hey guys.. just starting my first HMT setup.. i got this egay turbo from a friend for free... it needs a rebuild bad but i cant figure out what it is??! as well.. once its idetified, does someone know where i can get a rebuild kit for cheap?? says its a TD40 as well it says T25 lol.. also, the oil feed goes in the hole beside the exhaust inlet and the drain goes on the other side corect?? im real new to this and i couldnt find any info..






thanks guys..

Travis

 

looks like a genuine t25 garrett. you can get a rebuild for cheap off of ebay, or you can send that puppy to BLAAST and i believe he'll give you a 6 month warranty....

 

thats what i thot.. now.. about the oil lines.. i always thot the oil drained from the bigger fitting and the feed was in the smaller side fittings.. but the oil drain flange is pointing towards the manifold on this turbo.. when it gets rebuilt, can it be rotated??

 

The bigger of the 2 holes is the drain and yes it can be rotated make sure that there is about a 30 degree angle for the drainage pointing toward the engine, some people like to have it pointing straight down but I was told by Garrett to have a slight angle.

Cheers

 

Slight angle toward engine yes