NOOB QUESTION....NEED A LITTLE HELP
Alright guys just got my project done....Its a 93 civic hatch with a d16z6
Setup is Garrett Super 60 turbo gated at 11psi... HF manifold with adaptor plate DSM 450'cc injectors apexi FMIC 2'5 Inch FMIC piping 3" Inch Turbo back exhaust ARP head studs And bone stock top and bottom end.. Car made 236HP and 200TQ Street wideband tuned with cromepro..... My Question is wanna do a little upgrade with the Manifold and run a tubular....Does this mean i will need to retune my car or should I be fine just changing them out??? Also I'm going to install a boost controller and turn the boost down to about 7 or 8 psi....Until I can go all out on the bottom end.... So my question here is would I need a retune in this situation if I turned down the boost ??? Any help at all would be great....Have searched but may have over looked sorry if this may be a repost..... |
Re: NOOB QUESTION....NEED A LITTLE HELP
post some pics of the setup then we can discuss your problems
|
Re: NOOB QUESTION....NEED A LITTLE HELP
Originally Posted by primed16
Garrett Super 60 turbo gated at 11psi... Also I'm going to install a boost controller and turn the boost down to about 7 or 8 psi.... |
Re: NOOB QUESTION....NEED A LITTLE HELP
O ok that was another thing i was unsure on but if I run the tubular mani I will upgrade to external wastegate....
|
Re: NOOB QUESTION....NEED A LITTLE HELP
most external WG's come with a few different rated springs that very. as far as having to re-tune no its not going to be n issue.
|
Re: NOOB QUESTION....NEED A LITTLE HELP
|
All times are GMT -5. The time now is 07:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands