no seals???
 

well i got around to installing my dsm 390s and searched for the plastic seals that hold my injectors in the manifold only to find metal ones that look like they've been pressed in. WTF do i have take off my whole intake manifold to drill them out or what. D16y8 motor.

Re:no seals???
 

ok you have got to be looking at the wrong thing

Re:no seals???
 

no im not man. i pulled out my stock injectors tonight. i have a 97 civic ex d16y8. the only seals i had were black ones that were between the metal seals and my injectors

Re:no seals???
 

those are them...you got it

Re:no seals???
 

well i solved the problem today. i ended up grinding down my injectors so they fit. everything seems to look good.

Re:no seals???
 

You grinded down the injectors? or the seals?
??? :o

Re:no seals???
 

something isn't right at all with what you are saying. there are black rubber seals on the manifold side and smaller red or green seals on the top rail side. don't know what you are speaking of with metal seals. sounds like when you removed the injectors the seals stuck to them and you were looking at just the seat in the manifold. grinded your injectors...yikes!!!

Re:no seals???
 

No way!? :o :-X
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:no seals???
 

ok once again, those green seals that are pictured in these forums are non existant in my car. i don't even have anything close to resembling them. i took off my stock injectors and the only seals i had were like o-rings and metal to metal contact between the injectors and the intake manifold. i was like WTF, i have cock rings for seals and my injecotrs don't fit. so i grinded down my injectors and they seem to fit fine. NO ----!

Re:no seals???
 

those green seals were bought at napa, the ones in your car are black...and there should be no metal to metal contact...how would that seal and hold boost ::) ::)