HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   nissan t25 Vs. dsm t25 (https://www.homemadeturbo.com/forced-induction-7/nissan-t25-vs-dsm-t25-39638/)

9tray turbo 05-17-2005 12:43 PM

nissan t25 Vs. dsm t25
 
is the nissan t25 bigger than the dsm, also how is the nissan t25 compare to the 14b. Turbo mag says the specs are 56mm compressor wheel and 62-trim turbine wheel in a 64a/r housing and my compressor housing is .80a/r, i just want to know which is better thanks. ???

9tray turbo 05-17-2005 02:04 PM

Re: nissan t25 Vs. dsm t25
 
any one ???

B16Drag 05-17-2005 02:34 PM

Re: nissan t25 Vs. dsm t25
 
I'd go with the nissan t25 but lets hear it from other peoples whos them. I know the DSM 14b is larger than the DSM T25, but sure if the nissan t25 and the DSM t25 are equivalent.

9tray turbo 05-17-2005 02:54 PM

Re: nissan t25 Vs. dsm t25
 
i think its bigger just not sure

9tray turbo 05-19-2005 11:55 PM

Re: nissan t25 Vs. dsm t25
 
anyone else ???

ThingyNess 05-20-2005 02:39 PM

Re: nissan t25 Vs. dsm t25
 
It's going to depend which Nissan T25 - there are many different variations.

If you could tell us what year/model of car the Nissan T25 came from, we might be able to help you further.

A CA18DET T25 is not the same as a S13 Silivia SR20DET T25, which is not the same as a 300ZX T25.... and so forth - you get the idea.

However, there is only one type of DSM T25, so you don't need to clarify that one.

9tray turbo 05-20-2005 03:21 PM

Re: nissan t25 Vs. dsm t25
 
i'm not sure but i posted the specs above :-\

koreanwilcox 05-20-2005 03:43 PM

Re: nissan t25 Vs. dsm t25
 
I used to have a Nissan style Garrett T25 that was .49/.48, I never used it on my car though, sold it off for a T3 before I had a chance to put it on.

I wonder how that compares to the DSM T25?

ThingyNess 05-20-2005 03:53 PM

Re: nissan t25 Vs. dsm t25
 
My mistake - I don't know how I missed those specs above. :-[ Yours (9ray turbo) is a decently large sized T25 - at 56mm major diameter on the compressor wheel, it's going to be bigger / better flowing than the DSM T25, which is ~52mm, IIRC.

The T25 that EJ1 Wilcox is describing is most likely a CA18DET T25, and is about as small as they get - smaller for sure than the DSM T25.

The CA18DET turbo supposedly maxes out at about 210 crank horsepower or so - which is about what the DSMs which came factory with the T25 were rated at on the showroom floor.


9tray turbo 05-20-2005 04:13 PM

Re: nissan t25 Vs. dsm t25
 
but how does it compare with the 14b ???


All times are GMT -5. The time now is 01:01 AM.


© 2024 MH Sub I, LLC dba Internet Brands