new turbo, no vtec?
09-26-2004, 07:03 PM
#1
0.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 139
new turbo, no vtec?
my t25 took a poop on me, so i swaped in a 14b.
day 1: the boost would spike to 11 then drop to 7 then settle at 9. this turned out to be the actuator was sticking a little.
day 2: get in start driving and it starts to shutter at 4800 rpm at WOT. at part throttle it isnt as noticable. i checked the wire from the ecu to the solonoid, and tried a different ecu and different chips. i havent had a chance to check the voltage on the line yet.
oil level seems fine, and the oil feed and drain seem fine (no leaks).
this is an obd1 sohc/p28/uberdata.
any ideas?
day 1: the boost would spike to 11 then drop to 7 then settle at 9. this turned out to be the actuator was sticking a little.
day 2: get in start driving and it starts to shutter at 4800 rpm at WOT. at part throttle it isnt as noticable. i checked the wire from the ecu to the solonoid, and tried a different ecu and different chips. i havent had a chance to check the voltage on the line yet.
oil level seems fine, and the oil feed and drain seem fine (no leaks).
this is an obd1 sohc/p28/uberdata.
any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
Killersohc
Turbo Parts For Sale
6
10-31-2006 12:17 PM
