need YOUR advice....t3/to4e Turbonetics Turbo on DOHC ZC???
 

T3/TO4E Turbo Charger. Specs: .57T Garret Compressor Wheel, .50 A/R Compressor, .63 A/R Turbine

need some advice ...
turbo too large?, when will spool be on average with this setup?

I plan only 7-10psi MAX! until built up ...

my current build is

dohc zc -(stock)- going to be fully built this winter
full engine management using T/E, & Wideband plx M300
equal length manifold, not egay or ssautocrap
450cc injectors, 255 fuel pump
38MM tial wastegate
greddy typeS bov
johnny racecar fmic

Re:need YOUR advice....t3/to4e Turbonetics Turbo on DOHC ZC???
 

that turbo should be okay for the setup...

late spool time is like traction control...it will be a hell of a freeway snail though.... not to mention make sure you tune it good.

Re:need YOUR advice....t3/to4e Turbonetics Turbo on DOHC ZC???
 

well if you're gonna have if built soon then that turbo is perfect! that's the same one im planning to get for my d15b

Re:need YOUR advice....t3/to4e Turbonetics Turbo on DOHC ZC???
 

good turbo, I would go with a .48 turbine though.

Re:need YOUR advice....t3/to4e Turbonetics Turbo on DOHC ZC???
 

would spool late, but still be pretty decent.

I know a guy that runs a t3 60/48 on a zc, and makes 185whp@10psi, spools at a pretty decent rpm. But on the track he also spins tire at launch like crazy.

Re:need YOUR advice....t3/to4e Turbonetics Turbo on DOHC ZC???
 

Good turbo size, full boost by 3500, lots of power.