Need some info on this map sensor.
 

Got this map from a member on here. Supposed to be a 3-bar but I want to make sure what it is before I put everything together. Doesnt have a tag or anything, put has a part number on the edge oposite side of the connector.

Reads "1007F25"

Any one know what this is?

Re: Need some info on this map sensor.
 

Google turns up nothing. We can't tell you ---- without Google.

Get pics, wire it into your car and tell us what voltage it puts out with key on engine off. It should be 1.60-1.65 or so, a hair less if your at a high elevation.

Re: Need some info on this map sensor.
 

Attachment 15220

It looks exactly like a GM but with no sticker. I felt like being lazy and wanted to see if anyone knew anything about it.Ill hook it up tomorrow and see what it reads. I was more so looking for what a brand.

I should probably make sure before I start burning chips with Zchem. Not going to run to well on a 3 bar configuration if its not a 3 bar. O0

Re: Need some info on this map sensor.
 

edit

Re: Need some info on this map sensor.
 

Double post.

Re: Need some info on this map sensor.
 

Edit: I had double post syndrome.

Re: Need some info on this map sensor.
 

Just went and put it on the power supply, checked voltage with my multimeter. Reads 1.53v

Re: Need some info on this map sensor.
 

Got a little elevation where you are?

I'd rock it as a 3 bar.

Re: Need some info on this map sensor.
 

North east Indiana .I think we are at 900 ft above. It sure as hell does not change elevation much around here.

Re: Need some info on this map sensor.
 

Here you go >http://www.robietherobot.com/storm/mapsensor.htm