Need some help setting up a Turbo setup (D16A6)
Ok i have a d16a6 stock with just 11:1 JE pistons...now i want to boost it and keep the 11:1 c/r, i have about $700 for a turbo setup and have some questions. I already have a HF manifold from my old crx hf and will be using that, i would like to get either a IHI(mazda) or a t3 .42/.48, i will be running turbo edit and dsm blue tops(450cc) also a Z6 intake manifold with ls t/b, and for intercooler it will be either the jrc 6' or a 10' intercooler if i can get my friend to sell it. ill be running 2.5 mandrel bends for charge piping....now for some questions i have a chance to get a t3 .60/.63 for a good deal, do you guys think that would be a little big for my setup?? also the oil restrictor from stealthmode will i need it or is it reccomended?? will my stock fuel pump be ok?? if not its no biggie pretty sure my parts car has a walbro and last question how bad is it really to run without a BOV??? i heard it just takes some of the life of the turbo away.....thanks any help would be aprecciated. also i would like to run 8-10 psi on the setup and i know my tune is going to be key especially since i have a higher c/r.
|
Re: Need some help setting up a Turbo setup (D16A6)
i would pull those high comp pistons, try to sell them, and put in some stock ones. and use the money you made from them to buy all the ---- you are forgetting
|
Re: Need some help setting up a Turbo setup (D16A6)
i'd rather boost the higher c/r setup then have to go inside the motor and evrything, and i did not include the misc. things but i know all of what i need to have a complete kit to finish everything, $700 is more then enough i have a friend that owns a junyard so i can get alot of the stuff for cheap.
|
Re: Need some help setting up a Turbo setup (D16A6)
with 11.1:1 and 8psi, you are looking at 15:1+ while under boost
but with stock compression and 8psi you would be ~12.5:1 under boost |
Re: Need some help setting up a Turbo setup (D16A6)
alright well the guy io bought the car from said it had 11:1 JE's in it which im not 100% sure on but im just gonna take the head off to make sure and if it does ill pull them and sell em and throw my vtec head on and i have an extra set of y8 pistons here, even if it dosen have the pistons i still got the car for a steal $300 88 dx with a6 swap didnt run screwed up the mpfi swap got it running the next day. :D thanks for the help.
|
Re: Need some help setting up a Turbo setup (D16A6)
do you guys think 4 u bends will be ebough to do all the piping??
|
Re: Need some help setting up a Turbo setup (D16A6)
should be,ive seen people do it with 3, and i have a t3 .48/.52 that ill sell ya, pm me if you want it
|
Re: Need some help setting up a Turbo setup (D16A6)
Well i decided to save for another week or two and just do a nice build, ill be using a t3 super(.48/.60) from turbo calculator and a bmc race manifold any1 running these?? it will be the log manifold and ill have a tial 38mm wastegate.
|
Re: Need some help setting up a Turbo setup (D16A6)
i would be carefull dealing with turbocalculator
|
Re: Need some help setting up a Turbo setup (D16A6)
yea thanks already got the heads up on honda-tech just wasnt sure about them, but thanks.
|
All times are GMT -5. The time now is 03:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands