NEED INFO
 

i suppose that this question has been made before. I hope i dont piss anyone off. But is there a way to mount the turbo in a 93 civic without losing the a/c?

Where i live, the a/c is a matter of life or death.

Re:NEED INFO
 

There is always a way to do anything. If you mean an easy/cheap way, that's a different story. I'd say the easiest way is to make an offset flange log manifold. Not the best in terms of efficiency, but it'll get the job done.

Re:NEED INFO
 

Hey man!

Thx, really, sorry to be a pain, any pics so i can have an idea and staart working on that?

Thx again!!!

Re:NEED INFO
 

You just need an exhaust flange, 2 1.5" schedule 40 Elbows and 2 T's of the same and your turbo flange. The 2 T's go together and the elbows go on the ends of the T's. Normally. the flange would be mounted right in the middle of the 2 T's, but you'll need to offset it to between the 1 and 2 runners instead of 2 and 3 to make more room. You can get the flanges from BMC Racing. Look in the classified for his sticky at the top. You can get the Piping from local plumbing supply stores or McMaster.com. Just get the Butt weld schedule 40 1.5" stuff. I'm at work now, so I don't have any pics..

Re:NEED INFO
 

I got the picture now, thx for your time.

Later dude