need help with vacuum lines?
 

Ok heres the deal, I have most of my turbo together, but now its time for the vacuum lines, I think I have a basic idea where there going to go, But I wanna make sure I don't ---- anything up, can somebody tell where all the vaccum lines go, I have a t-3 with internal waste gate, also as far as the map sendor goes, I just T them with check valves, and thats it? any help would bb great. thanks Ray

Re:need help with vacuum lines?
 

Well you have a vacuum line that goes from your compressor housing nipple to the wastegate actuator.

you have a bov that has a nipple, run a line to the intake manifold, you can tap off just about anything you want, (after the T-body) FP/PCV etc.

Map sensor, will get check valves 2-3 sometimes more, just get a plastic 3way T and have the valves bleed the boost, dont run them inline.

and thats about it for running vacuum lines, other than your boost gauge, that will also hook up to the manifold.

Jeff

Re:need help with vacuum lines?
 

thanks Jeff ;D, can I hook up the boost gage On the same vacuum with the bov? and for the map sensor, I will use the diagram that you posted a little while ago. thanks again

Re:need help with vacuum lines?
 

yup, you can do a double tap for the boost gauge/blow off valve if needed.

JEff