need help turboing this baby...
 

hey guys i been researching with serpo whos told me about this forum... thank god for this forum, other people always say spends 5-10k for a turbo...

anyways im in sydney ive got a civic ek1 d16y4 engine and wanted to turbo, not for much performance just for the turbo :)

so far ive researched from other threads by serpo (didnt wanna high jack them) that i can chip the ecu rom, someone can burn it or something, not sure on the specifics, if u guys can help....

also to save on manifold i can sink trap it, could someone provide specifics there, that leaves bv , downpipe, intercooler, right what else?andd anymore ideas on saving money on the remaining stuff would be good too

Re: need help turboing this baby...
 

glad you like the site....now read up....

yup you can chip the ecu, and yes you can sinktrap, and you need a wastegate bov, misc ----, like charge pipes vacume ts oil lines...

read up,

and

POST PORN

Re: need help turboing this baby...
 

D16 manis fit on the D14. I made a ram horn for a guy in Australia and it fit fine.

Re: need help turboing this baby...
 

ive been reading up so much on trubos and piecing together parts, ill probably end up using a TD04 with a t3 manifold and downpipe...

intercooler is a must i take it for a td04 turbo? so might look into that soon (would be good if i coulda ran without it)

my only problem now is ECU ECU ECU where do i get a cheap ecu to just run the d*mn thing, or even chip my ecu...?

Re: need help turboing this baby...
 

Re: need help turboing this baby...
 

hmm okay ive heard people on here can burn roms?

or what about buying a cheap unichip piggyback?

Re: need help turboing this baby...
 

www.suckmeoff.com

I found your mom on there earlier today.

Re: need help turboing this baby...
 

I don't know if I would bother, if it was JUST so I could say I had a turbo on my car...driving a turbocharged car is a blast, but there's a good bit of work and upkeep/maintenance involved, just to say you have one...IMO

Re: need help turboing this baby...
 

sweet, okay forget that idea then, ive already got a turbo car just want this turbo too...

okay back to the topic... best suggestions on ecu pwez?

Re: need help turboing this baby...
 

Dude...why are you always a dick? It's getting old...honestly, anymore if you can't contribute stop posting useless ----.

Because you're in the ek platform, I'd say dropping down to obd1 would be your best bet so you can at least chip and tune the setup yourself for little money.

Re: need help turboing this baby...
 

thanx for the advice dood, but i dont really have the guts to tune it on my own...

so i cant simply get a cheap unichip for $150AU and get it tuned (god knows how much)

Re: need help turboing this baby...
 

That's the thing...if you can at least burn the chip or know someone that can burn a basemap onto a chip for you, you can still leave the tuning to someone else. Obd2 honestly has no way yet to do any kind of diy tuning and chipping...you're solutions are still the archaic fmu or the even worse afc with scaled back injectors.

Re: need help turboing this baby...
 

WTF? I havent flamed anyone in like 10 posts! Your going soft man. :l

Re: need help turboing this baby...
 

Has it been 10? ----...you're falling behind ;D That one post just caught me at a bad time...my woman's been bitching at me all day so I'm a little cranky :P

Re: need help turboing this baby...
 

Hey man thats all you had to say.


Now I can officially turn this thread into a PJORN Thread..
RNBGUY.. Did you have a question?










http://www.petitepictures.net/images...ce_tits_42.jpg
http://www.fleshlight.tv/galleries/p...images/016.jpg
http://www.sexshouts.com/fleshlight/...06/gal27/3.jpg
http://www.xxxcomfort.com/xm408/03/pics/pp11.jpg
http://www.xxxcomfort.com/xm408/03/pics/pp18.jpg
http://fhg.peepeebabes.com/10027a/im..._10027-040.jpg

Re: need help turboing this baby...
 

someone needs a girl friend...

the only problem with that is i dont know how much i trust some random giving me an ecu setting which could blow my engine?

id rather get it all done from a pro to be honest but looking at cheapest way to do this (and not interested into going as far dyno etc)

Re: need help turboing this baby...
 

dude i was eating a french dip and you just fucked up my appotite

Re: need help turboing this baby...
 

ROFLMAO!!!!!!!!!!!!!!!

Re: need help turboing this baby...
 

man these pictures are anoying i gotta scroll down heaps...

so ur saying a piggy back system such as EMANAGE OR UNICHIP is useless on this car right?

Re: need help turboing this baby...
 

Huh??




http://galleries.babes.tv/hg/content...ch/pics/08.jpg
http://www.prettybabes4u.com/galleri..._posing/15.jpg
http://www.twistybabes.com/pornstar-...abe/babe05.jpg
http://www.sexy-archives.com/flexi/k...dancers-12.jpg

Re: need help turboing this baby...
 

if you are scared to tune your car yourself.
I suggest this route: apex1 vafc, and some dsm 450cc injectors.
*vortech FMU and a missing link.
or just leave it stock and don't worry about it

if you decide to do it yourself . the right way is still gonna cost you money. you will need a laptop, wideband, chip burner. egt. you will need to convert to obd1 and run a obd1 ecu/chipped.

if you chose to do it professionally, the price might be the same as doing it yourself/ because you wont have to buy the laptop and ----.

Re: need help turboing this baby...
 

It's a sad day when I'd say I'd rather see a fmu and missing link than an afc setup. As long as you stay under 6 pounds you shouldn't have an issue with the fmu :P

Re: need help turboing this baby...
 

what if i get this :

http://cgi.ebay.com/ebaymotors/OBD1-...spagenameZWDVW

and a harness would i have to touch it again or would it be set nicely...?

Re: need help turboing this baby...
 

Good deal. Make him a best offer of 130 or so. You might not be set for life with his basemap but it SHOULD suit you well for a minute.

Re: need help turboing this baby...
 

and just take it to a local tunning shop get then to tune it right?

screw that im just getting a piggy back i rekon, only $150AU for the unit and just get it tuned... less mucking around if u ask me

Re: need help turboing this baby...
 

Huh a piggy back? We didnt ask you actually.

We know what were talking about, so keep thinking of boomerangs and kangaroos and leave the car ---- to us, and listen, mate.

Re: need help turboing this baby...
 

ok then... if that makes u happy :) im just asking for help...

and leave my poor kangaroo alone... :P

anyway i had a pm from someone on here who said he can write up a basemap that will last my a while (untill i modify engine differently from when basemap was made) do you guys think this is a good option

Re: need help turboing this baby...
 

ROFLMAO!!! You still should get it tuned, and to run the basemap you still need an ecu that'll run it.

Re: need help turboing this baby...
 

Hes going full strength!! Thats...

FMU
AFC Hack
Chipped Ecu
+lots of JB weld

Re: need help turboing this baby...
 

yeah i kinda thought having a basemap written for my turbo specs and burnt for me would still mean i needed to retune it once its in the car not just leave it at that...

thnx for clearing that up

Re: need help turboing this baby...
 

Someone tell me what he just said? Tune the ecu?? Where the ---- was I when that lesson was taught here??

Look if its a good basemap then you can run it like that. Were talking good. Now when you wanna extract more power then you tune the car not the ------- ecu. When you tune you make modifications to your chip.. *program wise*.. Basically get in there and ---- with it. Joo understand? Your a little bit ahead of yourself. Take a few steps back and read all the stickys on here.

Re: need help turboing this baby...
 

yeah i get that, sorry your taking words a bit to litrall... i said tune your ecu i meant THE ONLY TUNABLE FUKEN PART IN IT THE ROM!!!!!

now i understand what your saying... but others are saying a ROM with a burnt on basemap has to be tuned , noone said anything about how good it is

NOW FUKEN STOP BEING A IMATURE PRICK AND HELP OTHERS I.E ONE OF THE PURPOSE OF A FORUM!!!!

Re: need help turboing this baby...
 

We have been helping you since the beginning.. Just giving you a little ---- about it.. Do your research like I and a few others showed you and you wont get flamed every other post.

Do you understand?

Again.. Go to google.com
The search part..
Type in..

whatyoursearchingfor:homemadeturbo.com

Read the stickys here and go to
PGMFI.org

I seriously hope they need to call the fire dept to put out the flames on your ass if you continue with your n00b bliss.

Re: need help turboing this baby...
 

i dont get it, whats an ecu?

fagot...

hey can u burn me basemap onto a rom like u pmd and my mate with an 88 crx...
ill give u details but how much for both shipped to australia?

ill get ecu from here somwhere and put it in ...

Re: need help turboing this baby...
 

Pm me ------.