need help with turbo setup
 

i don't know if this is the right place for this thread....i a home made turbo set that i just got from the junk yard....the turbo manifold is from a crx hf. and the tubro is from a volvo..it a t3 turbo.... have problem with the adapter plate.....this is how the turbo look like....
Attachment 18891
Attachment 18892

another thing is...is this the wasgate if it is then what is this little hole here....let me know what you guys think....
Attachment 18893
Attachment 18894
http://img.photobucket.com/albums/v6...6/HPIM1178.jpg

Re: need help with turbo setup
 

what is the problem, i dont ------- understand this post.

make the adapter plate or buy one.

i dont know what that hole is for, just run the ----, if it dosent work fill the hole with epoxy.

o, and thinking helps to figure stuff out,
just in case u were wondering about what to use, try your brain.

Re: need help with turbo setup
 

What a joke I hope that was free :-\

Re: need help with turbo setup
 

I have never seen a turbo like that before myself. And i have no clue what that hole is for either. If you want to make a good homemeade turbo try using 1-2 gen Talon, GSX, GST turbos or a Saab T3 turbo.

Re: need help with turbo setup
 

listen noob,you can use whatever turbo you want - from rhb5's to hx40 +
that wg actuator is fucked just rip it off, swap ex housings to one with a normal t3 int wg (.48 / .63ar) and use Jeffs carb spring mod.
still can't understand why noobs fail to get creative and solve their own problems like we did/do.
done