So i just found out the turbo on the car I just bought is a ching chong meow piece oh ---- so I need help deciding on a new one. Id like to get another t3/t4 that takes as little modification to my current setup.

[size=10pt]EDIT:
http://cheapturbo.stores.yahoo.net/gat350trw63a.html
would this be the right turbo for the job?if not then which one of these?

or list of garretts: http://cheapturbo.stores.yahoo.net/gatu.html

These are the specs of the turbo i have now(ching chang meowww):
Inlet 3"
Outlet 2"
Bearing Wet Floating Bearings
Oil Inlet 1/8 NPT Oil Inlet
Flange Standard T3/T4 Flange,
Swaps 350 WHP
Working Pressure: 5~30 PSI
Compressor .50 A/R Compressor
Turbine .63 A/R Turbine
Compressor Wheel Exducer: 3"
Inducer:2"
Turbine Wheel Exducer: 2.2"
Inducer:2.58"
Hot Side 5 Bolt Standard Hot Side
http://cgi.ebay.com/ebaymotors/T3-T4...spagenameZWDVW[/size]


Heres pics of my setup:

 

ya, the seal is out(i think), its smoking real bad and its not pulling very hard.

 

Whats up max, hopefully some of these guys can help you out with your D-series better than I can.

 

haha ya... thanks for referin me to the site bro!

 

http://cheapturbo.stores.yahoo.net/gat350trw63a.html
would this be the right turbo for the job?if not then which one of these?

http://cheapturbo.stores.yahoo.net/gatu.html

These are the specs of the turbo i have now(ching chang meowww)


Inlet 3"
Outlet 2"
Bearing Wet Floating Bearings
Oil Inlet 1/8 NPT Oil Inlet
Flange Standard T3/T4 Flange,
Swaps 350 WHP
Working Pressure: 5~30 PSI
Compressor .50 A/R Compressor
Turbine .63 A/R Turbine
Compressor Wheel Exducer: 3"
Inducer:2"
Turbine Wheel Exducer: 2.2"
Inducer:2.58"
Hot Side 5 Bolt Standard Hot Side
http://cgi.ebay.com/ebaymotors/T3-T4...spagenameZWDVW

 

are u running a oil restricter on that turbo

 

im not sure, how would i figure it out?

 

check if there is any thing on the oil line/system that lookjs like it could be used to restrict oil

 

it doesnt look like it does, where would i get one, part number/name? I saw some discussion on it when a guys for sale thread came up in my search.
Also, is the garret i posted right for my setup?