|
Re: NEED HELP!!! strange probelems after head install
I had a problem like that to, where you give it gas and it idles down and starts to die, it turned out it was the map sensor, double check that, even if it was good before, mine went out for no reason.
|
Re: NEED HELP!!! strange probelems after head install
well try another one. hopefully thats the problem. there was no check engine light though.... i was also thinking the tps, but again..no CEL
|
Re: NEED HELP!!! strange probelems after head install
cam timing is off..........1/2 tooth error (4.75 degrees) due to the 5mm shorted D15 block deck height.
Use a Y7/Y8 cam gear and set the ignition timing to 18-19 BTDC. |
Re: NEED HELP!!! strange probelems after head install
wild guess, vacume leak
|
Re: NEED HELP!!! strange probelems after head install
Originally Posted by Mista Bone
cam timing is off..........1/2 tooth error (4.75 degrees) due to the 5mm shorted D15 block deck height.
Use a Y7/Y8 cam gear and set the ignition timing to 18-19 BTDC. |
Re: NEED HELP!!! strange probelems after head install
well definitely have to try that...thanks for the info!
|
| All times are GMT -5. The time now is 07:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands