Need help with my built h22 turbo
03-28-2004, 01:34 AM
#1
0.0 BAR
Thread Starter
Join Date: Aug 2003
Posts: 8
Need help with my built h22 turbo
I am stumped, I have tried everything. I just did the motor changeover and hooked up my turbo kit and my car runs like sh*t. I have been hacking at it for the last 3 weeks, and am about to give up. If anyone lives in the seattle\everett area and would be willing to help me out, let me know. Itztw82@yahoo.com (todd)
03-28-2004, 05:39 PM
#4
0.0 BAR
Thread Starter
Join Date: Aug 2003
Posts: 8
Re:Need help with my built h22 turbo
setup:
auto race engineering sleeves
JE 10.3 to 1 Teflon coated pistons
Eagle Rods
Balance shafts removed
Balanced and blueprinted
350 head studs
h22a4 oil pan
stock head gasket
E-manage all harnesses
E-01
AEM fuel rail
Walbro fuel pump
450cc injectors
My vacuum is only at 8.3 and I can't seem to find a leak. It doesn't idle very well, jumps up and down like crazy. I am only getting Cel 43 which is fuel. I am so lost any ideas?
auto race engineering sleeves
JE 10.3 to 1 Teflon coated pistons
Eagle Rods
Balance shafts removed
Balanced and blueprinted
350 head studs
h22a4 oil pan
stock head gasket
E-manage all harnesses
E-01
AEM fuel rail
Walbro fuel pump
450cc injectors
My vacuum is only at 8.3 and I can't seem to find a leak. It doesn't idle very well, jumps up and down like crazy. I am only getting Cel 43 which is fuel. I am so lost any ideas?
03-28-2004, 05:46 PM
#5
3.0 BAR
Join Date: Mar 2003
Posts: 21,479
Re:Need help with my built h22 turbo
You have to have a VAC leak some where. Your VAC is very low. Check EVERYTHING. If you still can't find it try spraying some carb cleaner on connections and when you notice a change in the motor you found your leak.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
03-29-2004, 07:30 PM
#8
1.0 BAR
Join Date: Jan 2004
Posts: 210
Re:Need help with my built h22 turbo
had the same problem with my prelude. My actual boost guage dinky pile of ---- vacumm hose that comes with it was kinked and it read 10 in the vac. mine idle like ---- bogged and back fired and that was because i didnt have reisistors. dont know if that helps. I have a different set up as you but if you have DSM injectors you prolly need resistors or resistor box
03-30-2004, 02:30 PM
#10
0.0 BAR
Thread Starter
Join Date: Aug 2003
Posts: 8
Re:Need help with my built h22 turbo
its a 95 lude and it does have resisters, as for the vacuum problem I am stumped completely, are you saying my headgasket is leaking I wouldn't think so there 350 headstuds torqued down to 72lbs which is like 80 somthing Vs the stock headstuds, so it can handle the higher boost. For some reason my e-manage is loading this thing up with fuel for no reason. Thats what I don't understand.
