Need help with compression
Hi all
I own a vauxhall/opel corsa dont know if any one knows of that car, my question is can I use a 2mm head spacer when I add boost which is in the means of a TDO5 turbo. The car is a 4 cylinder bore is 75mm and the stroke is 73,4 and piston displacement is 1297 quibic centimeters and lastly the compression ratio is 9:2:1. One of my friends told me it will definatly work but need to make 100% sure before so I dont break my car, thanks |
Re: Need help with compression
I don't know what you mean by a head spacer, but if your compression is 9:1, just leave it, its plenty fine for boost
|
Re: Need help with compression
i think he means headgasket but that compression your at right now is very boost friendly. The higher the compression you go the more likely detonation will happen. Which BLOWS
|
Re: Need help with compression
9.2:1 compression is a very good ratio for boost.
|
Re: Need help with compression
ookay thanks 4 replying head spacer like a laser cut gasket but one that is 2mm thick and made out of god knows what, with a 2 normal head gasket on either side of the head spacerto drop the compression but you guys say that my compression ratio is all good for boost how much boost psi
|
Re: Need help with compression
yea your good. post pics of your car though
|
Re: Need help with compression
It will work, but it's unnecessary.
And pics of your car would ne nice ;) |
Re: Need help with compression
if your worried about parts breaking , leave it stock and dont finger ---- it ;)
|
Re: Need help with compression
Originally Posted by eeesee
ookay thanks 4 replying head spacer like a laser cut gasket but one that is 2mm thick and made out of god knows what, with a 2 normal head gasket on either side of the head spacerto drop the compression but you guys say that my compression ratio is all good for boost how much boost psi
I would say that on an (approximately) 1.3 liter engine that a DSM T-25 would work nicely at about 10psi. Of course I know nothing of your engine, is it OHV or OHC? Fuel Injected or Carburated? |
Re: Need help with compression
Its SOHC and and im using a mitsubishi TDO5 turbo bougt it from a mate for only 600 dollars so all I need to get done is the pluming and then im boosting will definatly get some pics going shortly thanks again
|
All times are GMT -5. The time now is 04:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands