HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   need help (https://www.homemadeturbo.com/forced-induction-7/need-help-103538/)

eurofixer 05-19-2009 09:10 PM

need help
 
my car apperantly smokes blue on start up and when under boost. civic b18c with a new turbo t3 super sixty, it has an oil restrictor, I did a leak down test , passed not lossing any oil and I have a cath can homemade, hose from gutted pcv valve to home depot catch can to pre turbo nipple on intake side of turbo and a breather off the valve cover any sugestions ??????

txdohczc 05-20-2009 03:06 AM

just becuase you have a restrictor does not mean its not blowing oil past the seals still. maybe you catch can setup sucks did you check to see if you have oil in the can

hatrack48 05-20-2009 10:55 AM

sounds like rings to me

BRIAN MP5T 05-20-2009 11:21 AM

PCV Valve.

eurofixer 05-20-2009 05:16 PM

rebuilt turbo, pcv valve gutted hose from to home depot catch can hose from catch can to pre turbo intake and a filter coming of breather . how does that set up sound , strangly enough in the winter it coolects in the summer not so much any ideas? I have done alot of research on catch can install still hard to figure out whats right motor is b18c and has a black box were the pcv valve is so I guted the valve and pluged the source of vacum at intake manifiold does any of this make sense please help its driving me crazy

iceracerdude 05-20-2009 09:52 PM

You might be pressurizing the block/crank. If you're using just a pcv valve, you're not holding pressure back.

txdohczc 05-21-2009 03:51 AM

i clearly wrote he has a gutted pcv going to a catch can. its obvious he is presurizing the crank case, and that is the problem im with hatrac saying the rings also.his catch can sounds like enough ventilation but im going to say the rings. also did you take the intercooler piping off to see if you have oil in them

BRIAN MP5T 05-21-2009 08:27 AM

What the ---- would you want to pressure the case for?

HOMO

txdohczc 05-21-2009 10:50 AM


Originally Posted by BRIAN MP5T (Post 1272149)
What the ---- would you want to pressure the case for?

HOMO

who said anything about wanting to pressurize the crank case. i never said he wanted to i said he is doing that thus ------- up his rings. so if you dont have a reading comprehension of a ------- three year old dont try to be cool

BRIAN MP5T 05-21-2009 01:21 PM

Orange Chicken...


All times are GMT -5. The time now is 08:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands