need all fitting sizes
 

Hey guys i am almost ready to put my turbo on but i dont have the dam fittings that go inside the 14b. Can someone tell me what sizes i need to go ito the oil in, water in/out.. thanks I did a search but could only find a -4an for an oil fitting....is that right? and what is -4an help pleaaaaaase

Re:need all fitting sizes
 

Take the turbo to autozone or napa and ask them... Napa usually knows their ----.

Re:need all fitting sizes
 

Napa doesnt know ---- about -an fittings though ::)

Pretty sure the inlet threads for the oil feed on the 14b are metric..

But I could have swore I've seen someone post some pics of -an fittings on them, sure its not that big of a deal to do.

Jeff

Re:need all fitting sizes
 

comone your trying to tell me noone has had to goto a hardware store or something to get these fittings......are an fittings the same as metric? need some help here thanks

Re:need all fitting sizes
 

i just sold mine. i bought it from amstreetrod.com and it came in a pack of two. fits the 14b oil fitting perfectly. i think it was a 7/16 fitting. ill fidn the part number and post it tomorrow.

Re:need all fitting sizes
 

ight. thanks... what sizes on the water anyone?

Re:need all fitting sizes
 

wtf... -an... fittings.. !??!
i didnt know you had to find out about all that ----! :o ???

Re:need all fitting sizes
 

If he did use a -an fitting, more than likly it didnt fit "exactly" tight, probably just put some teflon tape on the threads and tightened the ---- out of it. Because I am pretty certain that 14b's use metric fittings.

Jeff

Re:need all fitting sizes
 

anyone know how to get the fukka (oil pressure sensor) out??!!?? :o
I cant seem to get a socket on there its like 22-25mm and a pipe in the way means you cannot get a socket squarely on there, should i loosen the plate that the oil filter sits on? anyone got any recommmmmmendations? i cant get a spanner in there either... ARRRRGGGGHHH :-X

Re:need all fitting sizes
 

to get that out. just clamp some vicegrips on there and crack it loose..

http://www.honda-tech.com/zerothread?id=67146 -oil return
http://www.honda-tech.com/zerothread?id=109160 -oil return line setup
http://www.honda-tech.com/zerothread?id=114490 -oil return line parts
http://www.honda-tech.com/zerothread?id=71999 -where to weld oil return
http://www.honda-tech.com/zerothread?id=119100 -oil return line
http://www.honda-tech.com/zerothread?id=119539 -oil pan welding
http://www.honda-tech.com/zerothread?id=119715 -oil pan welding
http://www.honda-tech.com/zerothread?id=118687 -oil grade to use
http://www.honda-tech.com/zerothread?id=118694 -ft for oil feed line
http://www.honda-tech.com/zerothread?id=118807 -oil feed line
http://www.honda-tech.com/zerothread?id=119681 -oil feed line
http://www.honda-tech.com/zerothread?id=93550 -part for oil feed line
http://www.honda-tech.com/zerothread?id=114436 -where to buy brass t for feed line
http://www.honda-tech.com/zerothread?id=126335 -oil t question
http://www.honda-tech.com/zerothread?id=125438 -another place to buy oil lines
http://www.honda-tech.com/zerothread?id=131447 -oil feed line an/npt connector ?
http://www.honda-tech.com/zerothread?id=134078 -feed diagram
http://www.honda-tech.com/zerothread?id=133948 -oil bpst fitting again
http://www.honda-tech.com/zerothread?id=144586 -oil feed line restrictor
http://www.honda-tech.com/zerothread?id=155510 -oil leaks
http://www.honda-tech.com/zerothread?id=158018 -oil feed 3' better
http://www.honda-tech.com/zerothread?id=156571 -oil pan bolts
http://www.honda-tech.com/zerothread?id=170223 -oil pressure readings
http://www.honda-tech.com/zerothread?id=168084 -oil feed fitting
http://www.honda-tech.com/zerothread?id=131450 -oil feed diagram
http://www.honda-tech.com/zerothread?id=195068 -oil pressu
http://www.honda-tech.com/zerothread?id=364948 -BSPT and NPT AN explanation. ***