ned help with vacuum lines with turboing
 

i just put a turbo on my car its a 92 civic hatch but i wanna get the vacuum lines right wat do i need to do

Re: ned help with vacuum lines with turboing
 

whats the setup

Re: ned help with vacuum lines with turboing
 

There are alot of vacuum lines on that car you will have to be more specific.

Re: ned help with vacuum lines with turboing
 

its a t3 and im just wondering do u have to put a check valve ne were or re rout the lines , ita a z6

Re: ned help with vacuum lines with turboing
 

basic- vac line from manifold (T into) goes to boost gauge
what wastegate

Re: ned help with vacuum lines with turboing
 

stock waste gate but i drove it and it seemd to bog out under higher accel

Re: ned help with vacuum lines with turboing
 

internal gate?
external gate?

what fuel management?

Re: ned help with vacuum lines with turboing
 

internal and im using 420 injectors i believe and a boost activated fuel regulattor

Re: ned help with vacuum lines with turboing
 

i can only give it like 1/8 gas ne after it wants to bog out

Re: ned help with vacuum lines with turboing
 

Anything done with yoru ECU? Stock MAP sensor?

How do you have larger injectors and with a fuel pressure regulator? You need something to control the larger injectors.

Re: ned help with vacuum lines with turboing
 

your running 420's and a FMU/check valves? Get a ECU chipped or at the least a used VAFC to control those 420's

Re: ned help with vacuum lines with turboing
 

ok thanx im just using the resistor box that came with it , plus im basicly running blind first time turboing a car so everyone has there way of telling how to do it ,were can i get my ecu chipped i live in mission newhere in the states near me??

Re: ned help with vacuum lines with turboing
 

Re: ned help with vacuum lines with turboing
 

you can get a chip kit from xenocron or moates.com for like 30 bux, or send it in and have someone else do it for 80. Until then if you are using a fmu put your stock injectors back in.

Re: ned help with vacuum lines with turboing
 

just drive the ---- out of it, obviously you have no idea what your doing, so its going to blow very very soon, may as well enjoy it a bit first.... :y

Re: ned help with vacuum lines with turboing
 

my buddy from the states swapped me a ecu with a chip it runs better thanx for the help

Re: ned help with vacuum lines with turboing
 

sweet christ. Did you read anything on this site?