My wastegate on my log
 

Hey guys, I supposedly picked up this "FMAX" manifold (log style) and I need to have a hole cut for an external wastegate. I will be going with TIAL wastegate.

My buddy works at a place that can cut the hole and weld the flange on it (which I wont have for a couple of days) and I need to know the best place to have the hole cut. In the very center of the manifold there is a thin piece of steel that divides the 4 runners. Can someone maybe save the picture and paint in a circle the best spot to have it drilled?

Thanks,
Kevin


http://12.245.79.108/log.JPG
http://12.245.79.108/log1.JPG

Re:My wastegate on my log
 

well i believe that the type of car it is going in will dictate the best spot for the wastegate try to put it as close to the turbo as posible space permitting of course.

Beau

Re:My wastegate on my log
 

indeed, it really depends on which way the turbo is sitting. compressor on driverside or passenger side.

Jeff

Re:My wastegate on my log
 

The compressor will be on the passenger side

Re:My wastegate on my log
 

then put the wastegate on the driverside, on runners 1 & 2 if you can..

Jeff

Re:My wastegate on my log
 

Prefabbed turbokits like the DRAG and Revhard have the compressor on the passenger side. Runners 1 and 2 as in the runners that are on the drive side correct?

http://12.245.79.108/logged.JPG

Re:My wastegate on my log
 

Yup, that looks good, maybe just a bit more over..

Jeff

Re:My wastegate on my log
 

To the right... ??

Re:My wastegate on my log
 

ya a tad a bit more away from the center